MS900 4 in1 Rework Station from szcaravan's blog

Features:

●High accuracy MCU control is employed to synchronously detect whether the 3 tool channels can be used independently and synchronously without matual interference.

●Built-in vacuum generator.

●Super power.The whole machine can provide a maximum of 900W power output.

●Stand-alone machine can carry out multiple desoldering tasks simultaneously.

●Large screen graphics display screen which can display all kinds of parameter data and messages graphically. solderin iron

●The contents can be presented abundantly

●Automatically identify all kinds of welding tools and load corresponding parameters.

●The software can adjust the temperature automatically which is more accurate and convenient.

●Fault display and alarm functions available.

●Functions such as standby,buzzer ringing,temperature lock and factory data reset available.

●Support communication interface.It can access to a computor,and complete various settings following the specified program.RC Jet Soldering iron Sky Flight Rc Jet kerui Security alarm 

●Vacuum desoldering pen is added to facilitate dismantle the desoldering components.

Input VoltageAC 100V/110V/120V // 220V/230V/240V 50/60Hz (Optional)Total Power900W(MAX)Accessory Tool NameHot Air StationSoldering StationDesoldering StationElectronic TweezersPowerHeating component 550W,air pump 25W130WHeating component 150W,vacuum pump:15W100WOutput voltageThe same with the input power24VDC24VDC12VDCTemperature range150~500℃150~500℃150~500℃150~500℃Standby timeNA1-120 minutes1-120 minutes1-120 minutesAir flow grades23L/minNANANANoise<52dB(A)NANANATemperature adjusting range-50~+50℃/-90~+90℉Lock settingAvailableTemperature stability±5℃±2℃±2℃±2℃Tip to ground impedance<2ΩTip to ground voltage<2mV