The
freemax vape
Pro sub ohm tank is the follow-up release to the popular Fireluke Mesh,
the first sub ohm mesh tank. Picking up where the Fireluke Mesh series
left off, the Mesh Pro is all set to become even more popular although
it’s actually patterned after the original Fireluke Pro.
The Mesh Pro is a 28 mm wide resin tank with a push-to-open top fill
that can fit 5 mL of e-liquid – it goes up to 6 mL with the use of the
bubble tank. It is compatible with all the coil heads of the Fireluke
and Fireluke Pro tanks (including the RTA deck,) but not the heads from
the original Mesh tank. There are four new coils introduced with this
tank, including what’s said to be the very first multi-mesh coil heads
for sub ohm tanks. A single mesh 0.15-ohm and a 0.2-ohm double mesh are
included in the kit. Also available is a triple mesh 0.15-ohm, plus an
SS316L single mesh 0.12-ohm coil head for wattage or TC
vaporesso vape
.
The Freemax Mesh Pro has a playful design without going over the
top… but it’s a bit large. It stands from base to tip at about 55 mm.
Freemax says it’s 25 mm in diameter, but that’s only referring to a
sliver of the atomizer base that sticks out. The actual diameter of the
tank is 28 mm (and with the bubble tank on, it increases to about 32
mm.) Depending on how your mod is designed, this could potentially lead
to an issue with fit. It barely fits on my mod with an extended battery
cap.
Having said that, the Mesh Pro functions well with no real hiccups.
It came to me very clean! It’s got nice O-rings and it’s smooth and easy
to disassemble. The coil swap is a standard screw-to-base design, but
it’s effective. And it’s got fully adjustable bottom-fed airflow with
two large slots measuring 11 mm by 3.5 mm.
Filling the Mesh Pro is easy and convenient. The filling mechanism
is a push-to-fill that’s marked by a red dot along the metal base of the
top cap. I’m happy to not see the word “push” engraved on the tank!
While the red dot is the sweet spot, the push-to-fill top cap opens from
a wide radius, which adds to its convenience. The actual fill slot is
relatively wide enough that you can pour juice directly from an open
bottle — though I’d still recommend using a squeeze bottle or
dropper.The Mesh Pro has four coil heads being released. As mentioned,
it will also take the Fireluke and Fireluke Pro coil heads as well as
the RTA deck. I don’t have those, so I will stick to what’s new:
u2022eney7485yyWEEEEDD
The Wall