Type ZL Elastic Pin Teeth Coupling from buzai232's blog

Mshkin ZL Elastic Pin Teeth Coupling is made of several non-metallic elastic pins and two half couplings. The coupling is connected by lacing these elastic pins into holes of two half couplings, and thus the torque is transferred. Mshkin ZL Elastic Pin Teeth Coupling can compensate the relative offset of two axes to a certain extent. Elastic parts are sheared during operation and are generally applicable to the working conditions of medium speed transmission shafts with low requirements. Allowable working temperature environment temperature is -20~+70 C, the nominal transfer torque is 110~280000N.m.Get more news about Elastic Pin Coupling Wholesaler,you can vist our website!

HL type - elastic pin coupling has been listed as the national standard GB5014-85, for a variety of mechanical coupling two coaxial axis of the drive shaft, usually used for frequent high and low speed movement. Working temperature of -20 ~ +80 ℃; transmission nominal torque of 40 ~ 20000N.m.

　　● Flexible pin coupling has a large structure is simple, reasonable, easy maintenance, two symmetrical interchangeable, long life, allowing a larger axial movement, with a buffer, shock absorption, wear and other properties.

　　● Shaft hole type has cylindrical (Y), conical (Z) and short cylindrical (J). Shaft hole and keyway according to the national standard GB3852-83 "coupling shaft and keyway form and size" of the provisions of processing. Semi-coupling using precision casting, cast iron HT20-40, cast steel ZG35 Ⅱ, shaft hole and keyway with drawing, the pin made of MC nylon b made.

　　● Elastic pin coupling is made of a number of non-metallic elastic material made of the pin, placed in the flange half of the coupling flange, through the pin to achieve the coupling of the two halves, the coupling structure is simple, Easy to manufacture, replace the replacement of flexible components more convenient, do not move the two halves coupling. The material of the elastic element (pin) is generally made of nylon, which has the ability to compensate for the offset of the two axes. The elastic part is cut and the working reliability is very poor. It is only applicable to the medium speed transmission shaft which is very low. In the work of high reliability requirements of the working conditions. HL type - flexible pin coupling basic parameters and the main dimensions