WHAT IS COMMERCIAL PLYWOOD ? from buzai232's blog

It is difficult to give an exact price of this type of board at all times because the plywood market in depends a lot on sources of raw materials, so when the price of raw materials is high or low, the price of plywood will also change. However, to buy plywood at a good price, you can contact directly the Fomex plywood factory, which always has a very good price for you at all times. To get more news about commercial plywood, you can visit boosterplywood.com official website.
About the most outstanding feature of this type of board is that the input material usually has to use higher quality fillers (In our factory, we usually use grade A), the glued surface is also high grade. With higher grade of veneer, the glue can also works better.
Basically quite similar to ordinary plywood but more detailed in some stages such as materials and finishing. Below is the production process of commercial plywood. Basically, the first 4 steps of commercial plywood and packaging plywood are the same, only differing in the materials used:

Step 1: Select hardwoods such as acacia, eucalyptus, peeled and cut into appropriate lengths.
Step 2 : The pieces of wood are put into the peeling machine to create the desired size and thickness (filler is also divided into many types: A, B, C).
Step 3: Dry the filler: can be dried in nature or use a dryer. In Vietnam, the climate is hot and humid, so many manufacturers often choose the outdoor drying method to save energy.
Step 4: Rotate glue or glue strips. Usually manufacturers will use glue machines to spread the glue evenly on both sides of the filler sheet.
Step 5: Filling this step is usually manual, the thickness of the sheets are usually determined by this step. In turn, it will be a thin veneers followed by a horizontal turn to make the solid sheets, then vertical turn, staggered like that until it reaches the thickness that we need.
Above are 10 basic steps to form a commercial plywood in our factory. Indeed, to have a good plywood to fully meet the needs of customers is not simple at all. But above all we know we always need to work on improving our production lines, improving product quality, finding good solutions for the environment and reducing costs to be able to compete better.