Bike dynamic road testing machine is suitable to test bike's run test& brakes performance test. The tester is formed by two rollers with varied diameter and follows specification to install jump plates at bike's seat post. pedals, bars, luggage carries, with load set to this tester. Adjust the distance between front and rear wheel base on the standard for complete cycles, constantly rotate the wheel is by 7-27km/hr and the bike is supposed to maintain its normal function, no part damage or crack is found. For brake test, follow the specification specified roller's friction coefficient, wind speed and water-spray amount of loaded brake & handlebars to test the performanceGet more news about motorbike testing equipment,you can vist our website!
Structure & Function:
This bike and road test machine is formed by two different diameter rollers and follows specification to install jump plates at bike's seat post, pedals, bars, luggage carries, with load set to this tester. Adjust the distance between front and rear wheel base on the standard for complete cycles, constantly rotate the wheel by 7-27km/hr so that the bike is supposed to maintain its normal function, and no part damage or crack is found. For brake test, follow the specification specified roller's friction coefficient, wind speed and water-spray amount of loaded brake holding handle to test the performance and judge bike's performance under the defined frequency.
| By | buzai232 |
| Added | Jun 27 '22, 06:55PM |
The Wall