Inspection method for quality of black film faced plywood for construction from buzai232's blog

Inspection method for quality of black film faced plywood for construction

The black film faced plywood for construction are mainly used in construction sites to speed up the solidification speed and quality of concrete and to ensure that they are formed at the specified locations, but quality inspection is required before construction. The bearing capacity of the product to be inspected first, because in addition to bearing its own weight, the product carries the pressure of concrete.To get more news about film faced plywood, you can visit boosterplywood.com official website.

Therefore, there is a certain standard for the bearing capacity of the black coated board for construction. Products smaller than the load standard cannot be used. When the initial inspection, a sample can be selected and stepped on the foot to see if there is any obvious break. The glue strength is mainly to ensure the subsequent use of the product, that is, the turnover rate, in order to save engineering costs. When testing, you can select a sample and put it into the water for a period of time to see if there is any open glue.

Because one side of the black coated board for construction is in contact with the concrete, in order to ensure the quality of the concrete, the surface needs to be smooth and flat, and there should be no scars or scratches. Only by truly achieving the above three points can it be regarded as a qualified black laminating board for construction.
Okoume BS1088 marine grade plywood is also made of wood. It is made of wood. When transporting plywood, we should pay attention to it. Because these plates are made of wood, the impact is easy to break. Affect its use.

In the choice of trucks, trucks with compartments are preferred because they prevent the panels from being affected by the natural environment, such as sunlight or heavy rain, to ensure the quality of the panels is intact. If you can't use a truck with a carriage, then we should also cover the board with a cover and try to avoid contact with nature.
In addition to the above, we should also ensure that the packaging of the board is intact and that there are no scratches, which will affect its service life. At the same time, plywood is a kind of plate with a wide range of applications. Okoume BS1088 marine plywood needs to be protected in terms of use, cleaning and transportation.