Rockler adds spring-loaded bar clamps from buzai232's blog

Rockler adds spring-loaded bar clamps

Rockler Woodworking & Hardware has introduced spring-loaded, ‘one-handed’ bar clamps that close with a single squeeze of a trigger.Get more news about Spring Clamp Suppliers,you can vist our website!

“These styles of clamps are great for holding things down. They go from wide open to fully closed in an instant, and it’s very convenient. We like to say it’s like a third hand. With these you hit the button, squeeze it once and its tight,” senior director of product developer Dan Wenning tells Woodshop News.

The clamps have a single-finger release trigger that activates a patented spring mechanism. Wenning says the release trigger can also be feathered to ease the jaws shut for more delicate applications. They are big help with cabinet assemblies, according to Wenning.

“They’re also good for installing trim on a cabinet. I did this with a big piece, over 6’ long. As you’re adjusting the miter on the left side, you can take this across the face and quickly slide the clamp with your arm all the way and snap the button. You don’t have to worry about aligning or squeezing. It’s great for positioning pieces.”
R&R Fixtures Micro V spring clamp allows holding of various sizes of cylindrical parts using its spring arm non-marring tip to adjust for the varying O.D. heights. Parts can be set on the V at a position using the adjustable end stop.

The clamp can be easily mounted and positioned anywhere on a plate using its adjustable base. It is designed to make holding any cylindrical part easier and more accessible with its light clamping force.