Elastic Pin Shaft Coupling with Big Transmission Torque
ZLL elastic pin coupling is a kind of pin made of some non-metallic elastic materials, which is placed in the flange holes of the two-half coupling and connected with the two-half coupling through the pin. The structure of the coupling is simple and easy to manufacture. It is convenient to install, disassemble and replace the elastic elements without moving the two coupling. The material of elastic element (pin) is usually nylon 6, which has the ability of micro-compensation for the offset of two axes. The elastic element is sheared when it works, and its reliability is very poor. It is only suitable for medium-speed transmission shafting with very low requirement, but not for high requirement of reliability.Get more news about Elastic Sleeve Pin Coupling Factory,you can vist our website!
Elastic pin coupling with pin is made into a plurality of non-metallic materials, placed between the two half couplings and the outer ring of the inner surface of the hole, the pin transfer torque to achieve the two halves of the coupling, the coupling has the following features:
1. the transmission torque is big, when the rotating diameter of the same torque is smaller than that of the gear type coupling, small size, light weight, can be partially replaced by the gear type coupling.
2.compared with the gear coupling structure, the elastic pin tooth type connector is simple, less components, convenient manufacture, no gear cutting machine.
3. the elastic pin tooth type coupling and easy maintenance, long service life, remove the plate to replace the nylon pin.
4. the elastic pin tooth type coupling nylon pin for self-lubricating materials, no lubrication, not only saves the lubricating oil, and clean work environment.
5. the kinetic energy damping elastic pin tooth type coupling, large noise.
By | buzai232 |
Added | Aug 22 '23, 11:10PM |
The Wall