User blogs

Are these the best led strips I have used?

These are some of the best addressable RGB led lights you can currently get on Amazon. Despite them not liking a 330ohm resistor on the data line they still easily beat the competition due to their colour accuracy and build quality.To get more news about led lights strip, you can visit htj-led.com official website.

I’m going to review a product by BTF Lighting – The SK6812 RGB LED lighting strips. I’ve been exploring different manufacturers in a bid to find the best LED strip for my own personal projects

I have made floor lamps, desk lamps and even have installed an Ambilight setup behind my pc monitor, I’ve tried many different LED strips including WS2812B. But, these particular addressable RBG led strips are not your run-of-the-mill LED strips – They also include white channels for ambient lighting when colour is not really required.

You ask good questions! The BTF Lighting SK6812 led strip is a clone of the WS2812B meaning they are also addressable, however, these differ by separating out the white channel giving you separate control but what does this mean for you? Well, everyone has heard of Phillips hue and I am sure you have too.

Enough procrastination; SK6812 based RGB lighting strips are mostly interchangeable with WS2812/B strips with the exception of the Fastled software which currently doesn’t support the chip – not a problem though, we will be using Adafruit’s Neopixel Library, WLED and Prismatik to test these strips to their maximum capacity.

A clean white packet that doesn’t feel cheap, unlike other brands. From the moment I unpacked them, I could tell the quality. Inside the packaging is a roll of led strips with connectors pre-installed allowing you to feed power in as well as daisy-chain your setup.

Connecting the lights to our Wemos D1 mini was easy. Due to using more than 10 leds, we had to supply the lights with an external power source as the Arduino board wouldn’t be able to provide enough juice.

The animations provided by WLED are really crisp and smoother compared to the 60 led per/m set they also offer. I put this down to the higher density of less and less black spots.

Due to not having any color calibration tools, I ended up eye-balling it instead, for my purposes they look deep and highly accurate to the eye. Prismastik’s performance is impressive with no observable dropped or lagging frames.

I had originally considered going for the APA102 Led Strips because they have a higher refresh rate but the problem was they don’t come in a RGBWW variant. I wanted to be able to use my led strips for mood lighting when I was not gaming or watching films on the Ambilight setup.

robust-led-strip-lights

Turck is expanding its LED lighting portfolio with the new versatile series WLS27 of its optics partner Banner Engineering. Featuring a shatterproof, UV-stabilized, polycarbonate shell, WLS27 LED strip lights are ideal for machinery and workplace lighting in harsh indoor and outdoor applications. Designed with the same durable, low-profile design and efficiency as Banner’s work light strip family, WLS27 LED strip lights are optimal for mounting even in narrow installation situations.To get more news about custom neon signs, you can visit htj-led.com official website.

The hygienic design in a robust round housing meets the high requirements in the food industry, as well as in the machine tool or in the area of mobile machinery. The WLS27 LED strip lights are suitable even for applications in the semiconductor industry, requiring a laminar air flow.

The WLS27 LED strip lights resist exposure to high-pressure, high-temperature water, solvents, cutting oils and a broad range of chemicals. They are available in rugged, water resistant IP67 and IP69K construction. An internal temperature monitoring circuit protects the device in extreme conditions, ensuring the light does not overheat.

To satisfy diverse applications, the WLS27 is available in eight lengths from 145 mm to 1130 mm and multiple color illumination options, including single, dual, dimmable and cascadable configurations. Color options include cool white, warm white, red, green, blue and yellow. WLS27 LED strip lights are offered in flexible mounting options, allowing users to deploy them in areas and applications where other lights may not fit. Optional snap clips are also available for simple installation and repositioning.

How to Determine the Length of LED Rope Lights You Need

Illumination is an essential part of any interior or exterior design. Once you’ve painted walls, installed flooring, and added furniture, you still need to make sure your family can find their way around after the sun goes down. Naturally, your home came with some lighting fixtures installed, often overhead dome lights in every room. You’ve probably also added some lamps to create a more inviting atmosphere. However, you can do a lot more with lighting from both a functional and decorative standpoint. When you decide to add strings of LED rope light to interior and exterior spaces, you have nearly unlimited options for creating the perfect ambience for any room or occasion. Whether you use them to artfully line staircases and bookshelves, you outline doorways or windows, you backlight artwork or mirrors, or you drape them over canopies or pergolas, you can create truly unique and stylish spaces around your home. Of course, you first need to figure out how much product it will take to complete your project. Rope lights come in a variety of lengths, and you can always cut and patch them to make them shorter or longer as needed. However, it helps to know how much rope light your project requires from the outset. Here are a few tips to help you plan accordingly.To get more news about led lights strip, you can visit htj-led.com official website.

Plan Your Project
The first thing you need to do before you start purchasing rope or strip lights is figure out the scope of your project. What exactly do you want to accomplish? Most lighting projects have a dual purpose. From a practical perspective, you want to add illumination to indoor or outdoor spaces. Even if you have other lighting options, it never hurts to devise alternatives to brighten rooms or add lighting to specific areas. On the other hand, lighting can also serve a decorative purpose. LED rope lights can accommodate on both scores thanks to a variety of colors and options for brightness. You can use them not only to illuminate outdoor pathways, for example, but also to provide a decorative border between hardscape and landscaping features. Indoors, you can use rope lights to cast a colorful glow on shelving or curio cabinets. They could provide ambient illumination above kitchen shelving, along baseboards, or underneath counters or tables, just for example. Planning out your project in detail before you purchase rope lights can help you to determine the amount of product needed to realize your vision.

Take Measurements
Once you have a clear idea of what you want to accomplish with your lighting project, it’s time to start taking measurements. In some cases, this will be as easy as running your measuring tape along the length of a wall or shelf, or measuring the perimeter of a mirror, for example. Other projects may be more complex. If, for example, you want to spell out a word or create a unique design with your rope lights, you may first have to build a frame or draw out a full-size mockup to determine the precise length of lighting you’ll need. Or if you plan to drape strings of lighting over a canopy or across a patio cover, you might have to multiply or take several measurements, depending on the effect you hope to create.

Overestimate
Taking precise measurements is essential to purchasing the proper amount of product for whatever project you have in mind. However, it’s always best to overestimate and you should shoot for about 10% more product than you think you need. This way, if your measurements were slightly off or you make a mistake when cutting or installing lighting, you’ll have the extra length you need to complete your project.

Cutting and Connecting Rope Lights
You may not be able to find the precise length of LED rope light needed for your project. The good news is that you can not only trim rope lights down, but you can also connect them to create shorter or longer strings, as needed. This will require some additional products (caps, connectors, etc.) and you’ll have to exercise proper safety precautions any time you tamper with electronics. However, there are many tutorials to help you complete the process and get the exact length of rope light to meet the specifications for your particular lighting project.

These Govee LED strip lights may leave some marks behind

A few days after installation, we decided to remove the strip to test the removal process. The strip peeled off the brick surface easily, but the adhesive took some of our black paint with it.To get more news about custom neon signs, you can visit htj-led.com official website.

The website FAQs state, “The adhesive may damage the paint on your wall during removal. It is recommended that you peel the strip lights off slowly and carefully to prevent damage.”

We felt we removed the strip quite slowly and carefully, but still sustained some damage. Therefore, we’d caution anyone using this product to have extra paint on hand for touch-ups upon removal.

It's also important to note that the adhesive won’t be sticky enough to use again, so you want to be sure you don’t plan on repositioning the strip once you decide where to install it—you’ve essentially got one chance to get it right.

Privacy
Before inviting any smart technology into your home, it’s wise to brush up on the product’s privacy policies—even for a product like strip lights, which don’t have a camera. The Govee app does require a username and password, but know that two-factor authentication is not available.

All user data is encrypted and is not shared with third parties; similarly, location data is neither recorded nor shared, according to Govee.

We recommend choosing a strong password (though the app won’t prompt you with any special requirements for doing so), as that’s your only real line of security defense.
With plenty of smart home devices on the market, it can be easy to overlook décor options like these Govee LED strip lights when you’re focused on more practical things, like thermostats and leak detectors. But don’t forget that smart devices can also serve to customize your home, add to your décor, and even help regulate your mood.

There’s no shortage of brilliant ways to use smart light strips at home, from illuminating dark hallways to creating a home theater all your neighbors will be jealous of. And, once you dig into the Govee app, you’ll be astounded by all the colors and light patterns you can create so that you’re always displaying just the right ambiance.

As long as you do your measuring homework ahead of time to ensure minimal product waste and choose clever ways to conceal the placement of the strip so that it doesn’t stick out when not in use, the Govee LED Strip Light M1 is an affordable and easy way to personalize any room in your home.

How to Install LED Strip Lights

LED Strip Lights provide a flexible means of both indoor and outdoor illumination. Strips are typically up to 5m in length but may be cut at designated regular intervals. Chains of strips may be achieved given the correct power supply. The adhesive backing allows LED strips to be attached to all surface types.To get more news about led lights strip, you can visit htj-led.com official website.
How to Install LED Strip Lights
Installing LED strips is a relatively straight forward process. Always ensure to consult an electrician when combining two or more strips in a chain, as power supply considerations will vary according to circumstance. Steps:

Measuring Up The length of an LED light strip may be shortened with scissors at any of the regular highlighted intervals along the strip, usually indicated with a line, spaced roughly every 10cm (4 - 5 inches). With this in mind, make sure to adjust the desired final position of the strip such that the end connected to the power supply is close to an appropriate outlet. The choice is also generally made to move the powered end of the strip close to a drill-hole in a cupboard, for example, so that wiring may be easily concealed.
Power Supply LED light strips are generally sold in bundles containing a power pack and connectors. This power supply will be relevant to the manufacturer's guidance on powering the strip. Using an alternate power supply could result in overloading the strip (burnout) or conversely may result in a dimmer over all output. When purchasing the strip and power supply separately, be sure to consult the literature accompanying the strip for best results.
Cut & Connect The designated ‘cut’ points located at regular intervals along the strip allow a safe place to expose the wiring within the strip. This is where the power supply connector ‘clips’ into place. A small section of the strip is placed inside the connector, which then snaps shut to provide an insulated completed connection.
Wifi Connectivity
A standard 5m (16.4ft) LED light strip should provide ample length to suit most popular locations around the home and garden (e.g. kitchen cabinet under-lighting, garden shed). Extending beyond this length would ideally entail a separate strip complete with a seperate power pack (although solutions involving multiple wires from a singular power pack are available). This avoids complicated chain strips, which must be powered properly. A popular DIY solution to controlling multiple strips from a singular switch is to build wifi connectivity into the circuit. Wifi boxes may be purchased separately, and can be controlled from a linked smartphone, tablet, or virtual assistant (e.g. Alexa, Google Home). Alternatively, seek professional advice when attempting a setup that allows multiple strips to be controlled from a central physical switch.
Splash Proof & Waterproof
While waterproof and splash proof LED strips are widely available, an important consideration to bare in mind when choosing suitable lighting solutions is that not all strips are water resistant (the added feature of water resistance is commonly reflected in the retail price). Where a non-waterproof light strip is intended for use in areas likely to come into contact with water, trunking is available in both clear and semi-clear formats.