User blogs

The Most Satisfying $6 I Ever Spent On My Rental Apartment

Perhaps you don’t lie awake at night thinking about your bathtub or shower. Just know that there are others out there who worry about how gross their caulk is, and feel a good fresh bead around a tub can make or break the shower experience.To get more news about Caulk Strip, you can visit senpinghz.com official website.

In an effort to take back my 12 minutes of coconut-infused “me” time and to stop worrying about what sorts of mischief was lurking behind the crappy caulk application around my tub, I decided to start fresh. I didn’t trust myself to lay a perfect bead of caulk, so I went the peel and stick route:

The most important part of this entire process is the removal of the old caulk. If you want new caulk to work (either traditional or peel and stick), get every last bit of evidence of the old caulk off the tub. I was able to easily pop the top layer of caulk off, but found another layer below that was hard and very difficult to remove. Instead of using a putty knife and risking damaging the surface, I sprayed on a caulk remover and scraped it off with a plastic blade.

After I was able to peel everything away, I wiped it clean with Bar Keepers Friend, rinsed with water, then followed up with rubbing alcohol.Once the area was completely dry, I measured for the three lengths of the tub: one back wall, and two side walls. I folded the caulk over at the crease according to the directions, and applied the longest length first (tub back), working in small sections and making sure to only peel away the backing for a few inches at a time. I made sure the crease was lining up at the intersection of the wall and tub surface first, then went back over and pressed down the seal onto the surface of the tub and then the wall. After I got the back piece in place, I stuck the remaining pieces to the sides of the tub in the same manner.
Ease of application: If you’re able to successfully stick a label to a package, then you’ll be able to correctly apply this caulk around your tub or sink. I found the key was to work in very small sections and not to peel off any more of the backing than what I could hold across the width of my hand.

Quality/stickability: This caulk is surprisingly tacky; it’s lined on each side of the crease with a sticky substance. I was really determined to press every inch of the caulk to the surfaces, so no water could get behind the seal. Know that if you do accidentally lay the caulk in the wrong spot it’s fairly easy to readjust, as long as you haven’t pressed it down for too long.

Cons: I tried pressing the caulk strips into the small “grout” gaps (grout is in quotes because it’s actually a plastic tile sheet, and the grout lines aren’t real) to be sure I didn’t have any gaps where water could trickle down behind the wall, but it wouldn’t smush in like regular caulk. Since it’s plastic, I doubt water is going to seep through the wall, but it’s something to think about in your bathroom.

Looks: I really like the look of a nice, straight line all the way around the edge of the tub versus a slightly wiggly line smoothed out by fingers. The caulk comes in white, or almond, narrow, and wide widths.As a renter, I love this product and think it’s easier than the real deal. With the purchase of one small package, I remedied a fairly sizable problem and don’t have to deal with buying a caulk gun, storing an open tube of caulking (that will absolutely go bad before I can use it all up), and steadying my hand enough to run a somewhat straight bead around the tub. Not to mention, the peel-and-stick caulk’s straight lines look so very tidy and satisfying.

BODY ARMOR STRATEGIC REVIEW

Following the contract awards for the U.S. Defense Logistics Agency (“DLA”) Enhanced Small Arms Protective Inserts ("ESAPI") and U.S. Army Vital Torso Protection (“VTP”) ESAPI body armor plates, we have been engaged with our customers to complete the necessary product approval processes. Disappointingly, the VTP ESAPI plates have encountered a failure in First Article Testing which will significantly delay the likely approval timetable for this product.To get more news about camouflage bulletproof vest, you can visit bulletproofboxs.com official website.

Separately, we have experienced further delays in obtaining final product approvals for the DLA ESAPI body armor plates, with approvals for this product now expected in the second quarter of our financial year ending 30 September 2022 (“FY22”).Our FY22 revenue guidance included approximately $40 million of body armor revenue. In light of the above, the financial contribution from our body armor business in FY22 and beyond will be significantly reduced, with the ultimate impact, including any associated cost savings, depending on the outcome of the review process.

These issues and the strategic review are restricted to the body armor business, with the Group’s leading respiratory protection and helmet product portfolios unaffected.
Our underlying trading results for FY21 are expected to be in line with the guidance set out in the post close trading update of 13 October 2021.

We have delayed the announcement of our FY21 results, initially planned for 23 November 2021, to allow for a review of the carrying value of the assets related to the body armor business and the additional audit work arising from this post balance sheet event.

We will confirm a revised announcement date, which we expect to be in early December, as soon as practicable. We will include an update on our strategic review of our body armor business and provide updated guidance for FY22 and beyond alongside our FY21 results announcement.

The Best Smart Home Security Systems for 2022

It's easier than ever to set up a smart home in which you can remotely control your lights, lawn mowers, thermostats, vacuums, and just about everything else from a smartphone app. It has also made it simple (and relatively affordable) to monitor your home from pretty much anywhere. Smart security systems are highly customizable and available as do-it-yourself kits or as full-blown setups that include professional installation and monitoring.To get more news about smart home solutions, you can visit securamsys.com official website.

Depending on your needs, you can go with a system that you monitor yourself, or pay a subscription fee to have professionals surveil your home 24/7 and contact your local fire or police departments when alarms trigger. You can even take advantage of on-demand monitoring services when you're away on vacation. Of course, the more coverage you have, the more you should expect to pay.

If you're not ready for a dedicated security system, plenty of standalone devices are available that let you monitor your home from anywhere via your phone or tablet, including indoor and outdoor security cameras, video doorbells, motion sensors, and smart locks.

Here are our top picks, as well as what you need to know before deciding how to secure and monitor your home. We also have a beginner's guide to setting up a smart home if you want to do more than just secure your property.
Why We Picked It
The Vivint Smart Home security system is a full-blown home security system that gives you 24/7 monitoring and full control over door locks, cameras, thermostats, and lights. You can even monitor your cars while they are on the road. This pricey system provided speedy emergency response times in testing and is easy to control via a colorful, 7-inch touch-screen video panel, a mobile companion app, or Alexa and Google Assistant voice commands.

Who It’s For
The Vivint Smart Home is ideal for homeowners who require a professionally monitored home security system but don’t want to be bothered with installation issues. A trained professional installs every component and the company provides excellent telephone and in-home technical support. You can save some money with a DIY system from SimpliSafe but, in that scenario, you have to install everything yourself and forgo the touch-screen video control panel.

How Long Do e-Bike Batteries Last?

Determining the battery life of an e-Bike is not only calculated on the number of cycle charges they can take before they gradually go on flat. There are a lot of factors to consider in knowing the life span of a battery.To get more news about how long do ebike battery last, you can visit magicyclebike.com official website.

Some of these factors would be the surrounding conditions like temperature fluctuations, age of the battery, etc. Also, the type of battery being used is to be considered.What is the average battery life of an e-Bike?
On average, a typical electronic bike battery can surpass 800 full charge cycles. It can sometimes go up to a thousand charge cycles depending on the type of battery used.

Now, we need to understand that charging the battery from 30% – 100% is not a “one full charge cycle”. We must keep in mind that we can only count it as “one charge cycle” if the battery was at 0% – 100%.

In general, if we consider the type of battery being used, the battery’s age, and how often the battery was charged, we can safely say that batteries on e-Bikes can last anywhere from 3 – 5 years.
3 Types of e-Bike batteries
1. Lithium Batteries
It is the most reliable battery used on e-Bikes. More than 90% of e-Bike batteries in the market are composed of lithium. These batteries can generate more power, lasts longer, and is lighter than the other batteries. Because of this, it also is the most expensive among the three.

– Average charge cycle before it needs replacing: up to 1000 charge cycle

Lithium-ion (Li-ion) – most popular with longer life span
Lithium-ion Subcategories:
Lithium Cobalt (LCO) – higher energy density (provides optimal power), lesser weight
Lithium Manganese (LiMg204) – Hybrid, the same type used in hybrid cars.
Lithium-ion Polymer (Li-pol) – unique, this battery has no liquid components. Less prone to being damaged through misuse.
2. Nickel Batteries
It has the same power in comparison to lithium-ion batteries. Unfortunately, nickel batteries have high tendencies to self-discharge faster than the other ones on this list.

– Average charge cycle before it needs replacing: around 500 charge cycle

Nickel-cadmium (NiCd) – rare to find these days as they became a toxic pollutant to the environment, these batteries are very hard to recycle. More capacity than lead-acid batteries.
Nickel-metal Hydride (NiMh) – more efficient than NiCd but it costs more. These batteries are easier to recycle and tend to last longer.
3. Lead Batteries
This type of battery is the oldest among lithium and nickel. While it is the cheapest you can find in the market right now, it has a few drawbacks. Lead-acid batteries are heavy. It is five times heavier than lithium-ion batteries. Aside from this, it has a short life span in comparison to the other two. It’s not good to purchase lead-acid batteries if you are going to use your e-Bike regularly.

The Best Bike Mirrors (Review) in 2022

Bicycle enthusiasts and seasoned cyclists of all ages need durable gear and accessories to keep them safe while they’re riding their bikes. There are many accessories that are designed to enhance one’s cycling experience. Bike mirrors are a valuable accessory that can improve safety in city streets, highways and mountain trails. These mirrors can be mounted on handlebars, helmets, and even on sunglasses. They are incredibly practical and ideal for both recreational and professional cycling. If bicycle mirrors are on your shopping list and you have no idea what to look for in terms of features and brands, then our best bike mirrors guide below should steer you in the right direction.To get more news about ebike mirrors, you can visit magicyclebike.com official website.

Our top pick is by Hafny, which uses stainless steel in its manufacturing process. This feature alone is enough to reel in eco-friendly riders who want to reduce their carbon footprint and spend their money on durable non-plastic bike accessories. Stainless steel mirrors are recyclable, and the lens is unbreakable. These two qualities are accompanied by a high-impact frame that can be folded whenever the bike is not in use. The mirror can also be rotated at a 360-degree angle, giving you full control over its position. Plus, you can easily attach it to any kind of bike be it a mountain, city or road bike in just a few easy steps.

Our next mirror is also a great helmet accessory that allows you to keep an eye on the road behind you, especially when cycling down busy streets with intersections. The Safe Zone mirror from EVT is easy to install and is made by a company with 20 years of experience in designing and building bicycle repair tools. Their helmet mirror is 2.25 inches with an adjustable arm that can be easily attached to any helmet of your choice using durable straps. The Safe Zone bicycle rear view mirror is large enough to uncover any blind spots and sturdy enough for a daily commute to work. It is also designed with bumpy roads in mind and can be easily stored and transported when not in use.

The MTB bar end mirror from Mirrycle is one of the best handlebar mirrors available. This accessory can be mounted in minutes and features a round 3-inch lens with a durable black arm. You can easily adjust the mirror to better suit your riding needs. This is an ideal feature for people who prefer placing the mirror below the handlebars. Plus, the large mirror surface rewards you with a better rearward view while speeding down your favorite bike lane.

Premium cycle mirrors like the Hafny handlebar bike mirror offer you the best of both worlds in terms of durability and features. The frame on this model is made of an environmentally friendly combo of nylon and fiber with an aluminum clamp that prevents scratches on the handlebars. The blue lens mirror was originally used in cars and reduces glare by 60 percent. This feature alone can come in handy during summer when the sun becomes a nuisance, especially when going on long rides during the day. The convex surface also gives you a wider field of view while cycling. The flexible rotation ball connected to the mirror allows you to control the angle and position of the lens. This means you can position it under or parallel to the handlebars.

The Take a Look mirror is a compact accessory and a bike helmet mirror with many great features. You can attach it to your eyeglasses and rotate it using the multiple pivot points easily while cycling. Keeping tabs on any moving vehicles behind you is possible with minimal head movement or eye strain on your part thanks to the wide field of vision it provides. Plus, the durable stainless steel and brass frame were built for regular use and will not rust or lose their sturdiness with time. Take A Look is frameless and is a great alternative to traditional handlebar mirrors.

The CycleAware Reflex bicycle helmet mirror is another great option for seasoned cyclists. It has everything you need in a bicycle accessory in terms of size and adjustability. The oval length mirror is not only lightweight, but it can also be attached to all helmet types in just a few easy steps. You no longer have to strain your eyes or glance over your shoulder to check for speeding vehicles once you install this must-have accessory. The ball and socket combo are also a plus since you can alter the position of the mirror with a slight touch of your finger.

Handlebar mirrors like the DRCK HROS mirror were designed with your road safety in mind. The mirror itself is convex and made of durable acrylic. This makes it more resistant to breakage and to outdoor weather conditions. The aluminum arm is incredibly sturdy and is 7.08 inches in length and has a mosaic base with screws that helps stabilize the mirror while you cycle across mountainous terrain. The best thing about the arm aside from its durable construction is that it can be bent to any angle. This model is compatible with 22- 32 mm handlebars and can also be installed in electric bikes as well as motorcycles.

The best bike locks 2022: the toughest bicycle locks from Kryptonite

The best bike locks might not be the cheapest bike accessory you're going to buy this year, but they are essential to ensure your bicycle stays where you chained it. A tough, dependable bike lock will is a worthwhile investment; if you can stretch to buying a new two-wheeler, then it’s also prudent to factor in some extra cash to cover security, and buying the right bike lock to suit your cycle should be part of the bike-buying process.To get more news about ebike lock, you can visit magicyclebike.com official website.

There's been a huge increase in cycling over the last few years and the extra demand for bikes that are much more appealing to thieves. The best electric bikes, in particular, are at risk of being nicked if not secured properly, and while some have an immobilizer that stops them from being activated and ridden away without you present, that won't stop someone picking them up and stashing them in a van.

All that means it’s never been more important to get a quality bike lock to ensure your cycle doesn't go missing, and we’ve collated the best and most secure bike locks you can buy here in this buying guide. We’ve tried to mix it up a little, too, with a selection that caters for different scenarios, while others offer a little more convenience thanks to their innovative designs.
It makes sense to go for a decent bike lock brand, and Kryptonite is up there with the best of them. This great little bundle comprises a 13mm hardened steel shackle, which features a double deadbolt anti-rotation design. The U-lock design doesn't weigh too much either (3.55lb/1.61kg), while the revised design is more secure than earlier editions.

The Mini-7 is much smaller than Kryptonite's standard locks, which makes it easier to mount on your bike's frame if space is limited (and gives a would-be thief much less room to manoeuvre their tools). The mount attaches to the frame securely using a rugged fabric strap that won't damage the paintwork, and the lock slides and clips into place with minimal fuss.

The Evolution Mini-7 comes complete with a Kryptoflex 410, a 4' 10" double-loop braided steel cable. This can be used to secure other bikes, wheels or accessories, which is essential since the Mini-7 U-lock is too small to attach to your bike's frame and a wheel. While it's not impregnable, the fiddly aspect of this combination makes the lock package a solid option for short-stay park-ups in cities and suburbs.

In our tests, we found that the lock can sometimes rattle a little within its holder when riding over bumpy ground, but it's firmly fixed in place and never in danger of coming loose, so this is a minor complaint.Another bike lock from the Kryptonite security stable, the New York Fahgettaboudit Mini, is sold without a cable but beefs up the security with an extra chunky design. It's seriously weighty (4.55lbs/2.06kg), which is something to bear in mind if you cannot mount it on your bike and carry it in a backpack, but that heft comes with security benefits.

The main difference between the Kryptonite New York Fahgettaboudit Mini and the Evolution Mini-7 is the oversized hardened steel sleeve, which is built to withstand attack from bolt cutters and leverage attacks. It makes the Fahgettaboudit Mini a lock that will keep your bike secure all day, even in busy cities.

Like the Kryptonite Evolution Mini-7, this lock's smaller design means you won't be able to hook it around your bike's frame, wheel, and whatever sturdy piece of street furniture you're attaching it to, but you could supplement it with an additional Kryptoflex cable if you like.This package includes the Kryptonite New York Fahgettaboudit Chain (with 14mm six-sided links) plus a 15mm steel shackle. Both elements are super strong, using hardened steel to ward off attacks. The disc-style cylinder locking mechanism is also pick-proof and drill-resistant. It has the same top-level security rating as the Kryptonite New York Fahgettaboudit Mini D-lock above. You can also use it to secure multiple bikes.

However, the chunkiness comes at a price, as this weighs 10.8lbs/4.91kg, which means it's better suited to locking your bike up at home than carrying it with you on the go. There's also a risk of the parts of the chain not covered by the nylon cover scuffing your paintwork if you're not careful.Cable locks are known to be weak and easy to snip through with a pair of bolt cutters, but that's not the case with the Titanker Bike Lock Cable, which bucks the trend thanks to its durable steel core.

Unlike D-locks, this Titanker model offers between four and six feet of flexible freedom, allowing it to be threaded around, through or under a bike and a mounting point. The four-digit combination lock mechanism means there's no key to worry about. However, bear in mind that the cover is plastic rather than metal, making it less durable than more expensive, heavy-duty bike locks like those from Kryptonite.

It's not a lock that'll let you leave your bike outside day and night, but it's light, convenient, and a good choice for making quick stops. Better still, it can be easily attached to your bike's frame while you ride using the mount included.

These are the best electric bike sales for Black Friday that are already running

Just because we’re still a week away from Thanksgiving doesn’t mean you can’t already save big on a new electric bicycle. That’s because most of the e-bike companies have jumped the gun this year in an attempt to beat each other to the punch. And when they fight over us, we win. Case in point: All of these awesome e-bike deals (and some e-scooter deals, too) are already live and running!To get more news about ebike for sale, you can visit magicyclebike.com official website.

This list will be constantly updated in the days leading up to and through Black Friday and Cyber Monday. So be sure to check back for the revolving list of new electric bike sales!

Rad Power Bikes
Rad Power Bikes started early with its Black Friday campaign in late October.

One of the highlights of the Seattle-based e-bike company’s ongoing sale is that you can pick up a RadRover 6 Plus for a $500 discount. That’s a great off-road and trail bike for exploring outside of the freshly paved path. There’s also a $300 discount on the RadCity 5 Plus, which would make a great commuter bike when you’re sticking to the asphalt.
The RadRover 6 Plus is one of Rad’s newest e-bikes and introduced a number of novel features for the brand, including dual digital displays and upgraded hydraulic disc brakes.

The RadExpand 5 is also on sale for $100 off, which makes the new folding utility bike even more accessible to riders.
Lectric eBikes
Phoenix-based Lectric eBikes recently launched a highly upgraded version of its best-selling electric bike: the Lectric XP 3.0.

This folding e-bike is one of the best bang-for-your-buck electric bikes on the market right now, hands down. It offers speeds of up to 28 mph (though comes programmed for 20 mph out of the box, with the user able to unlock the higher speed via the on-board display). There are two battery options available for extra range, and the bike even includes a new motor and expanded rear rack for carrying a second rider.
The Lectric XP 3.0 carries an MSRP of $1,099, but is currently on sale for $999. That sale includes a bundle of free parts, such as a free lock, headlight upgrade, bigger and more comfortable seat, and a suspension seat post.

The cargo package and the passenger package are both marked down as well, so here’s a great chance to add those to your order if you want to save some big bucks.

It’s also a good time to check out the Lectric XP Lite as well, which is priced at just $799 and includes a number of extra accessories for free as part of the Black Friday Bundle.
Juiced Bikes
Juiced Bikes has some awesome deals running already on nearly every bike the company makes. It’s worth checking out the sales page to see what might interest you.

Some of the showstoppers include the popular RipRacer e-bike being marked down to a mere $999 and the HyperScorpion marked down to just $1,999. Both of those deals save you hundreds of dollars on some high-performance electric bikes.
Ride1Up
Ride1Up has plenty of e-bike sales going on across almost its entire line of urban electric bicycles. You can check out the entire list here.

But if you’re looking for some of the best deals, you should check out the $250 off the 500 Series offer, which brings the bike down to $1,145, and $400 off the Ride1Up LMT’D, which brings that model down to $1,495.

Saving $250 on the now $895 Roadster V2 is also a steal of deal, as is the $250 discount on the $945 Core 5.

And if you want a fast yet comfortable cruiser-style electric bike that can carry a second rider, don’t overlook the Ride1Up Cafe Cruiser, which is on sale for $350 off, bringing the price down to $1,245.

We’ve reviewed nearly every e-bike in Ride1Up’s lineup, and the company’s overarching theme is quality, high-performance urban electric bikes for several hundred dollars less than you’d expect to find at pretty much any other major retailer.

High-Adhesive Butyl Sealing Tape

BU-TYLENE ALU PROFESSIONAL is a self-adhesive sealing tape made of a butyl rubber compound protected by a reinforced metal film in aluminium, available in various sizes/colours.‎ The difference compared to the Brico range consists in the easy peel siliconized release paper.‎ Both release paper edges exceed some millimeters from the tape itself, featuring an easy removable release paper.‎ Bu-tylene Alu Professional is highly adhesive to all materials and especially to plastic, glass, steel, polycarbonate, wood and bitumen as well.‎ Bu-tylene Alu Professional is self-protected by a metal film in aluminium, making it highly resistant to ageing and oxidizing caused by atmospheric and chemical agents.‎ Excellent adhesive properties; Excellent heat stability; Excellent adhesion at low temperatures; Resistant to ageing and UV-rays; § Solvents Free; Easy Peel.‎ Sealing and joining materials such as glass, steel, plexiglas, polycarbonate, wood, aluminium, pvc and most other common bulding materials.‎To get more news about Butyl Seal Tape, you can visit senpinghz.com official website.

The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.

Excellent adhesive property

The tape is highly adhesive and has excellent permanent bonding power on a wide variety of surfaces, e.g. metal, plastic, wood, stone etc.

Good resistance to UV, weather and water

Can also be used outdoors and withstands rain and any other weather conditions (not suitable for use under water).

Resistant to ageing and high temperatures

When used correctly, adhesion and perfect sealing can last for several years
Also suitable for applications that are subject to high temperatures, e.g. sealing on bodywork

6 Things People Didn’t Know About Bulletproof Vests

Bulletproof vests – the one item in a police officer’s job that they take for granted. If more law enforcement knew a little more about the vests saving their lives, they wouldn’t be so gun-shy about using it in the line of duty.To get more news about bulletproof level 4, you can visit bulletproofboxs.com official website.

1 – They’re Not Actually Bulletproof
The term “bulletproof vests” is actually a misnomer. The vests are actually bullet resistant. The reality is that bullet resistant vests don’t protect the wearer from every threat. Nothing is bulletproof, not even a manhole cover. In an extremely minute percentage of cases, a bullet can get through a vest that’s been rated to stop them. The bullet could have a serrated edge or something similar to it. Bulletproof vests do not make the wearer become Superman.

Body armor is meant to absorb impact of the projectile. Depending on the vest’s rating it may have stronger absorption than other vests. This does not make it bulletproof. Most manufacturers avoid the term when naming vests, even when the vest is up to the highest standard.

2 – How The Fabric Stops Bullets
Body armor is comprised of very strong non-woven and/or woven ballistic fibers. The material will stop a bullet similar to how a net will stop a tennis ball or volleyball. It causes the bullet to turn, slow it down and send its energy through the whole panel. The bullet mushrooms, which helps in the process. Keep in mind that the slower the bullet is, the better off the wearer is going to be. Bullets that have a hard tip or fired at a high velocity will get through the fibers and right through the bullet proof vest.

3 – Every Single Gun Is Deadly
Many gun enthusiasts disregard the deadly potential some kinds of handgun calibers have. However, any bullet – small or large – that travels at a high rate of speed will get through body armor. Huge handgun rounds such as .44 Magnum and .45 ACP will travel at slower speeds, which allows the body armor to stop them. However, .357 SIG and 9mm guns travel at a quicker speed and can’t stop them as easily.

Important: The shells of a shotgun are very dangerous to bulletproof vests wearers because vests are not rated for these kinds of bullets. The reason? Shot shells do not have a consistent velocity.

4 – Bulletproof Vests’ Lifespan
The majority of the United States’ body armor has a standard National Institute of Justice five-year service rating. When a vest is worn each day, it loses the protective capability quicker than one that sits on a shelf. It doesn’t matter how short or long the body armor is worn, the vest should be carefully looked over for any signs of damage – creases, tears, smells and burns. If properly taken care of, the vest should last five years. Be sure to follow the care instructions. Read more about the lifespan of a bullet proof vest here.

5 – Send In The Warranty Card
Make sure that the agency fills out the warranty card to register the vest. If they don’t, be sure that you do. The reason is that during e.g. a Zylon vest recall, many companies will have a difficult time getting in touch with customers because they failed to send the warranty cards back.

CE attends opening of China International Import Expo in Shanghai

The Chief Executive, Mr Chui Sai On, today briefed President Xi Jinping on Macao’s progress while the President and other guests toured one of the Macao exhibition areas at the inaugural China International Import Expo (CIIE).To get more news about the 5th china international import expo, you can visit shine news official website.

Mr Chui’s briefing for the President happened after the Expo’s opening ceremony, at an Expo exhibition area titled “Macao Hub”, a section set up by the Macao SAR Government within the China Pavilion of CIIE’s “County Pavilion”.

CIIE was opened this morning by President Xi, who also delivered a keynote speech at the ceremony. The event, being held from 5 to 10 November in Shanghai, is the world's first import-themed national-level expo.

During the afternoon, Mr Chui toured a second Macao-themed display area, organised by the Macao Trade and Investment Promotion Institute (IPIM). It is at the CIIE’s “Trade in Goods – Foods and Agricultural Products Zone”, within the “Business Pavilion”.

Mr Chui visited several booths at the IPIM display and was briefed on the progress of the participating Macao enterprises and the products they had on display, as well as on other products made in Macao.

A third Macao-themed display at the Expo has been organised by the Macao Government Tourist Office and the Cultural Industry Fund. It is at the “Trade in Services – Integrated Services Zone”, also within the Enterprise and Business Pavilion. The aim of this display is to promote Macao’s function as a platform for trade and cooperation.

Macao Hub features photographs, text, videos and multimedia materials to tell the story of how Macao developed from a fishing village in the 16th century to an international commercial centre where East meets West. Since reunification with the motherland in 1999, Macao has been fully supported by the Central People’s Government regarding local efforts to seize opportunities arising from the advantages and policies of “One country, two systems”. Such efforts include developing Macao as a “Centre and Platform” integrated into the overall national development plan, and to ensure Macao continues to play a role as an important gateway between China and the rest of the world.

Mr Chui was an official guest at CIIE’s inauguration. On Sunday evening, as part of his two-day visit to Shanghai, Mr Chui attended a welcoming dinner.

Deputy Director of the Liaison Office of the Central People’s Government in the Macao SAR, Mr Yao Jian, joined the Government delegation as a guest.Other members of the Government delegation included: the Secretary for Economy and Finance, Mr Leong Vai Tac; the Chief-of-Office of the Chief Executive’s Office, Ms O Lam; the Director of the Government Information Bureau, Mr Chan Chi Ping; and the Director of the Protocol, Public Relations and External Affairs Office, Ms Lei Ut Mui.