User blogs

New prospects for China’s petrochemical industry following 20th Party Congress

China aims to shift its economy from “high-speed” growth” towards “high quality” growth, president Xi Jinping said in a report at the opening session of the 20th National Congress of the Communist Party of China on 16 October. The report lays out the country’s development objectives for 2035, with the goal of “significantly increasing economic strength, scientific and technological capabilities, and composite national strength”.To get more news about china 20th party congress, you can visit shine news official website.

Strategies that will attract the attention of chemical industry players include the upgrading of China’s petrochemical industry with investments that focus on bringing cost savings and stronger profits, as well an increased move towards green developments through eco-innovation, say ICIS analysts.

In the Congress, long-term themes highlighted in the 14th Five-Year Plan were reiterated, including the topics of technology and innovation, as well as rural vitalisation and urban development.

“China sets the target to substantially grow per capita GDP to be on par with that of a mid-level developed nation”, Xi said. He emphasized that “high-quality development is the top priority for the construction of a modern socialist country”.

Some indicators were also reiterated, with the report stating: “China is to reach the level of a moderately developed country by 2035, in per capita GDP.”

The targeting of “high quality” over “high speed” economic growth will involve integrating China’s strategy to expand domestic demand with efforts to deepen supply-side structural reform, the Congress report said.

Such development expectations will help boost chemical industry development in the longer term, driving demand from industries including polyolefins and polyesters.

The polyolefins market, which is connected to various end-use sectors such as construction, packaging, automotive and household appliances, could reflect the impacts of China economic development.

According to the ICIS supply and demand database, China’s polyolefins demand will see a CAGR (compound annual growth rate) of 3.6% between 2020 and 2030 and 1.4% in 2030-2050.

As the largest downstream application for polyvinyl chloride (PVC), the construction industry will drive demand for pipes and profiles with the policy of modernisation and rural revitalisation.

For example, the wire joints are wrapped around, and then folded back to leave a rubber pad: the first is to use polyvinyl chloride film as the base material.To get more news about High Voltage Insulation Tape, you can visit senpinghz.com official website.

Can be abbreviated as, high voltage resistance, sheath maintenance, repair, capacitor: Insulating electrical tape refers to the use of electricians to avoid leakage.
It has outstanding insulation function and ventilation conditions: generally suitable for insulation and white of various resistance parts, generally used for insulation of wire and cable joints below 70C: PVC electrical tape, lap joint.

The characteristics of insulating electrical tape and the insulation protection effect of electronic parts are also called electrical insulating tape or insulating tape.
When the insulating electrical tape is wrapped around the final layer of Z, the full name of the yellow insulating electrical tape is polyvinyl chloride electrical insulating adhesive tape, which is generally suitable for wire wrapping and transformers.
Insulation electrical tape has outstanding insulation, sealing, fixation, identification color, good weather resistance and other characteristics. It is necessary to surround it in a semi-stacked way, and repair the insulation damage. The insulation and fixation of electronic parts is close to the side. The manufacturing process of the insulation electrical tape is easy. Roll and blue should be applied to satisfy the tension.
Other, green, maintenance, repair, so as to prevent gouging, can not stretch, this is to make the wrapping uniform and regular state, sealing, flame-resistant, transparent and other colors.

And on the parallel joint.

What is the insulating electrical tape, flame retardant, transformer, cold resistance and other characteristics, easy to tear, voltage stabilizer and other types of motors, black, insulating electrical tape should be wrapped around the end of the wire, the tape with an insulating effect, high temperature resistance, Bundle the wiring harness and wait sideways.
Use of insulating electrical tape for storage and withstand voltage.
It can also be used for binding in industrial processes. Insulating electrical tape should be stored at room temperature. PVC tape, etc. Titles, capacitors: When we use insulated electrical tape to prevent flags, motors, etc.

Is the electrical insulation tape capable of 100 degrees high temperature?
Higher temperature tapes include PI material glass cloth materials. Specially treated PVC insulating electrical tapes are mainly car harness tapes that can reach 105 degrees and 115 degrees. Generally, PVC material insulating electrical tapes can withstand a temperature of 60 degrees, and PET material tapes can be high. To 260 degrees, but because of the cost and the flexibility of its own raw materials, it will not be used as electrical insulation tape. The commonly used electrical insulation tapes in the market are all PVC raw materials, and they will not be used at higher temperatures.

Red Be Ready Utah Backpack representing a disaster supply kitThe most important first aid things you need for your disaster supply kit is not in your kit at all. It is proper training in what to do in a first aid or medical emergency. Learn what to do in a medical emergency situation by taking first aid, CPR, and AED classes from the Red Cross or other reputable first aid training organization.To get more news about best ifak, you can visit rusuntacmed.com official website.

Personal protective equipment (PPE): You are the most important person in an emergency situation, so you need to be careful and watch out for yourself so you are able to continue helping others. Have some basic PPE supplies in your kit for protection from bloodborne pathogens and other infections that you could encounter when giving first aid assistance to others. Include PPE items such as:
First aid kit: When you are putting together a first aid kit for your disaster supply kit, refer to other lists for suggestions as to what you could add, but remember that the first aid supplies are only meant to be for three to five days and only meant for one to three people. First aid kits should reflect the amount of first aid and medical training you have had. Each person in your family should have their own first aid supplies in their own kits packed according to their own needs and abilities. Remember that you need to have room for the other eleven of the twelve areas of emergency preparedness in your kit and it still needs to be portable. Instead of a hard case, pack your first aid supplies in a sturdy, zip-style freezer storage bag to save room, keep your first aid supplies together, and to keep the supplies dry but not dried out. Some first aid supplies you can put in your disaster supply kit include but are not limited to:

First aid instruction booklet: Our understanding of how to best apply first aid is always improving. CPR and severe bleeding are just two areas that have changed considerably in the last decade. Be sure that you have up-to-date training and an up-to-date first aid booklet in your kit to help you remember safe and proper treatments.

Personal medications: Whether they are over the counter or prescription, you know what medications you and your family members need to maintain your health. Make sure that you have a supply in your kits and that they are rotated as needed. If you are not able to store them in your kits, make sure they are added to your prioritized evacuation grab list.

Insect repellent: Biting and stinging insects can carry disease. In a disaster situation where medical help may be limited, you want to be sure to minimize that possibility. Plus, bug bites are annoying and you don't want to add stress to a stressful situation.

Sunblock and lip balm: Preventing sunburn can be a vital part of survival. When your skin is burnt, you don't sweat properly and your body's natural cooling function does not work. It is very easy to over heat and go into heat exhaustion or worse. Protect your skin with sunblock and protect your lips with a high sun protection factor (SPF) lip balm. Petroleum based lip balm can also be smeared on a cotton ball and used as a fire starter.
You can add other items as you see fit, but remember to not make your kit too big. It still needs to be portable. If you have specific medical training, you may want to add items such as a pressure cuff or a stethoscope, but the average person with basic first aid training will have no use for these items.

A McLennan County police agency is donating equipment which could potentially save the lives of officers in another small department about 20 miles away.To get more news about bulletproof zone customer service, you can visit bulletproofboxs.com official website.

"Our daily vests won't stop a rifle round--the ballistic vest that we donated to them will," said Beverly Hills Police Chief Thomas Schmidt. "I just figured: pay it forward."

Last week, Beverly Hills PD donated eight ballistic plates and carriers to the West Police Department.

"Even though we're a small department we're located on a major interstate, you never know when we have to go to an active shooter or standoff," said West Police Chief Darryl Barton. "Literally, down the road, it might save one of my officers lives."The thicker, heavier ceramic plates protect against rifles and will not replace the soft, ballistic vests officers were daily, but will instead be worn in a carrier that goes on top, complimenting them during high-risk incidents.

"It's not about comfort, it's about survivability, it protects your vital organs," said Barton. "The ceramic will repel rifle rounds to where if we're in an active shooter situation, not only does he have this but he has his regular bullet-proof vest under that."

In an active shooter situation, a ballistic vest is one of the first lines of defense for police, however, the equipment isn't cheap, and not every agency can afford to give its officers a second layer of defense.The agency recently purchased new, two-in-one vests which allow for the soft and hard plates to be together in one carrier.

"This way we don't have to switch out anything," said Schmidt. "We've got it already on us."

The all-in-one vest packages cost about $2,200 each, and the steel plates never expire, Schmidt says.

He says he had to some some finagling, but reappropriated funds for a new patrol car to purchase the eight new vests.Hewitt Police Chief Jim Devlin did something similar last year by reallocating unused budget funds to buy 30 ballistic plates and carriers for every certified peace officer in his agency.

Devlin says he'd been looking into outfitting the department with the additional vests, which are more rifle-resistant, for years, however, having one of his officers shot last year pushed him over the edge.

"We see it every day, it's happening more and more," said Devlin. "We're encountering a lot more violence than we have over the last 25 years for sure, and the weapons are getting bigger, and they're getting faster, and they're getting stronger, and that's the problem.

Sparks fly as a circular saw slices into metal, while welders nearby work feverishly to the sound of blaring heavy metal. Upstairs, sewing machines clatter as women mark patterns on cloth being shaped into bulletproof vests.To get more news about bulletproof zone, you can visit bulletproofboxs.com official website.

An old industrial complex in the southeastern Ukrainian riverside city of Zaporizhzhia has become a hive of activity for volunteers producing everything from body armor and anti-tank obstacles to camouflage nets, portable heating stoves and rifle slings for Ukrainian soldiers fighting Russia’s invasion. One section specializes in vehicles, armor-plating some, converting others into ambulances. Another organizes food and medical deliveries.

With the front line about 50 kilometers (30 miles) from the city, some sections of the operation, such as the stitching of bulletproof vests, are working around the clock in shifts to meet demand. Crowdfunding has brought in enough money to buy steel from Sweden, Finland and Belgium, which is lighter than local steel, organizers say, a crucial quality for body armor.

The operation is the brainchild of local celebrity Vasyl Busharov and his friend Hennadii Vovchenko, who ran a furniture-making business. They named it Palianytsia, a type of Ukrainian bread whose name many Ukrainians say cannot be pronounced properly by Russians.The operation relies entirely on volunteers, who now number more than 400 and come from all walks of life, from tailors to craftsmen to lawyers. Apart from those involved in production, there are also drivers delivering humanitarian aid and medical equipment bought through donated funds.

“I feel I am needed here,” said fashion designer Olena Grekova, 52, taking a brief break from marking fabric for vests.

When Russia invaded on Feb. 24, she was in Thailand seeking inspiration for her spring collection. Initially, she said, she wondered whether it was a sign from God that she shouldn’t return. Her husband and two adult sons urged her not to.She had known Busharov for years. Arriving home on March 3, she gathered her equipment the next day and by March 5 was at Palianytsia. She’s been working there every day since, bar one, sometimes even at night.

Shifting from designing backless ballgowns to creating functional bulletproof vests was “a new experience for me,” Grekova said. But she sought feedback from soldiers for her designs, which have armor plates added. Now she is helping to produce several versions, including a prototype summer vest.

In another section of the industrial complex, 55-year-old Ihor Prytula was busy making a new camouflage net, winding pieces of dyed fabric through a string frame. A furniture-maker by trade, he joined Palianytsia at the start of the war. He had some military experience, he said, so it was easy to get feedback from soldiers on what they needed.

Mickey Thompson Tires & Wheels has launched a new, off-road use only tire designed to traverse even the most extreme terrain that today’s rock bouncing and mud bogging enthusiasts encounter. The Baja Pro X tire is on track to be the most aggressive off-road tire ever released by the company.To get more news about off road tire, you can visit gofortunetire.com official website.

The Baja Pro X is for off-road use only, due in part to new design elements such as the sticky compound and innovative Treadbiter™ cleats which make the tire too aggressive for street use. The Baja Pro X model takes Mickey Thompson’s proven off-road tires to new heights with exclusive attributes and durability not found anywhere else. The tire is currently only available in size 43X14.50-17LT, with additional sizes planned in the future.
We designed the Baja Pro X for extreme outdoor use: rock bouncing, mud bogging, deep mud, rock, snow, sand, dirt and gravel,” said Jason Moulton, Senior Product Development Manager for Mickey Thompson Tires & Wheels. “After the Baja Pro X was named a runner up in the tire category of the 2018 SEMA New Product showcase and won a SEMA Global Media Award, we are more excited than ever to get the Baja Pro X out to our customers to test on the trail or mud bogs.”

Mickey Thompson was an innovator and product pioneer who developed the first 35-inch-tall truck tire for off-road use. He created “tread-on-the-sidewall” tires for traction and pulling power in extreme conditions. Today, Mickey Thompson’s off-road tires are developed and designed with uncompromising standards and deliver undisputed performance.

ZemiSmart Zigbee Smart Lock (review)

Smart locks are abundant for most HomeKit users compared to a couple of years ago, although when it comes to mortice type locks that you find used in Europe and Asia, they’re still less common than deadbolt type locks. One typical solution for mortice lock users is with retrofit devices that sit over the key on the inside half of your lock, thus taking control of the key itself, and therefore the lock. The Nuki Lock (v2.0 and v3.0) and more recently the Yale Linus are two such products. The alternative to this option is with locks found in Asia, where the whole lock and handle mechanism are all replaced with one that typically has a fingerprint sensor, keypad and NFC functionality, as well as even more exotic options, like a peephole camera, for example. This can usually require a lot of work put into altering the door, so drilling is usually involved. The installation for the Aqara A100 Zigbee, that I reviewed not too long ago required two installers to make considerable adjustments to the door in order to install it, and that was even with a mortice lock already in place before. Luckily, the lock we’re reviewing today – The ZemiSmart Zigbee Smart lock – typically requires fewer adjustments to your door (assuming you’re replacing a mortice lock), due to its smaller overall size, and generally fewer parts.To get more news about best fingerprint door locks, you can visit securamsys.com official website.
Not to put too fine a point on it, but if you’re new to ZemiSmart, you may find some of their products come in pretty generic packaging, with the company logo missing on some of them. This seems to be that the products inside are themselves white label manufactured products (or ODM), so you may see some of the same products with a different brand on the front. This doesn’t apply to all of ZemiSmart’s product lines, although in the case of this lock, it would appear to be the case. as long as it works though, that’s the main thing, and as for the box, it protects everything really well. Good enough for me.

It should be noted that whilst the lock states ‘right’, as in the lock is designed for a door that opens from the right on the outside, the lock can actually be set to open either way, which I’ll explain later on. It also mentions ‘double tongue’ which means the lock comes with a latch bolt and a mortice bolt. Some locks the company manufacture are just latchbolt locks.
The box has the two parts of the lock you come into contact with (ie the handles), the manual (in English), the mortice lock that sits inside your door, and a bag full of small bits and pieces – a strike plate with plastic recess, some screws and bolts to fit the two halves of the lock together, a couple of standard keys, and two IC cards for keyless entry.

The two parts of the lock you come into contact with on a daily basis are, of course, the handles. These seem to be made of some kind of metal for the main frame, and glass or perspex for the fascia, to give it a more premium look and feel, whilst also allowing the keypad to register touch.

The top part of the interior section of the lock is home to the battery compartment, with the lock requiring four AAA batteries, with the company stating that they should last anything from between two to five months, depending on usage.

AutoCAD LT 2D Design Software

AutoCAD LT® is a computer-aided design (CAD) software from Autodesk that provides architects, engineers, and construction professionals with the ability to create precise 2D drawings and documentation. It's a cost-effective alternative to AutoCAD for drafting, drawing and documentation.To get more news about 2d construction drawing software, you can visit shine news official website.

There are some examples of the capabilities of AutoCAD and AutoCAD LT to be found in this article: These Fantastical Architectural Illustrations Are Made Using AutoCAD. To get started if you haven't used the software before, here is a list of 50 AutoCAD Commands You Should Know.

AutoCAD LT is essentially AutoCAD minus several functions making it the cheaper option. The most notable differences between software involve 3D solids modeling, including wireframe views, shadows, and reflections. AutoCAD LT enables you to do simple customizations but doesn’t support built-in programming capabilities (AutoLISP).

The subscription includes the AutoCAD mobile app and the new AutoCAD web app, available for Windows and Mac. Your AutoCAD LT subscription gives you access to install and use the 3 previous versions on up to 3 computers or other devices. By subscribing you can access the latest software, worldwide access (at home or when traveling), and quick technical support, among other benefits.

This product page contains affiliate links. An affiliate link means ArchDaily may earn referral fees through these links, without any extra cost to you. For more information please read our terms and conditions.

2D drafting and drawing is the process of creating and editing technical drawings, as well as annotating designs. Drafters use computer-aided design (CAD) software to develop floor plans, building permit drawings, building inspection plans and landscaping layouts.

CAD software for 2D drafting can be used to draft designs more quickly and with greater precision, without using stencils and technical drawing instruments. 2D CAD software also allows users to document and annotate drawings with text, dimensions, leaders and tables.AutoCAD LT 2D CAD software is the perfect solution for designers and drafters who want an easy-to-use tool for creating drawings faster and with more precision.

Top Robotics-As-A-Service Providers

RaaS, or robotics-as-a-service, is a novel artificial intelligence business model in which many robots give assistance as a service rather than as a product for automating jobs.To get more news about Robotics as a Service, you can visit glprobotics.com official website.

This is a new robotics trend that every company should be aware of in the near future. Robotics-as-a-Service allows these businesses to rent robots and use cloud-based technologies to automate their processes.For its autonomous mobile robots with artificial intelligence integration, Aethon is one of the top Robotics-as-a-Service suppliers. These mobile robots are commonly used in hospitals to conduct delivery and transportation jobs, allowing doctors and nurses to focus on patient care. It has cut the cost-per-delivery by as much as 80%.

The cloud control centre keeps track of every TUG robot in real-time. It uses artificial intelligence algorithms to send a secure VPN connection to the centre to transmit an alarm. Organizations can automate drop-off carts and a variety of other services.
Savioke
Savioke is a well-known Robotics-as-a-Service company that offers a variety of services like safe and dynamic navigation, autonomous elevator operation, long battery life, and more. It uses open-source software to provide healthcare, hotel, and high-rise solutions. Relay autonomous service robots are stationed throughout the hospital at all times to ensure a secure chain of custody.

KnightScope
KnightScope is well-known for its Autonomous Security Robots (ASRs), which provide real-time security patrols and actionable intelligence to security personnel. Eye-level mobile surveillance is known for providing unrivalled deterrence capabilities as well as high-quality evidence for criminal prosecution. The K1, K2, EBT Detection, K3, K5, K7, and KSOC are all available from this Robotics-as-a-Service company.

inVia Robotics
inVia Robotic Another notable Robotics-as-a-Service supplier that offers automation as a subscription-based service is Via Robotics. It offers cost-effective robotics services, including autonomous robots, strong software, and robotics experience. It can automate warehouses without the need for robot maintenance.

Through the Robotics Operations Centre, the Robotics-as-a-Service concept assists in the ownership, operation, and optimization of robots to maximise efficiency (ROC). Robots may be scaled up or down based on volume and seasonality, removing the need for unreliable labour pools.

Locus Robotics
Locus Robotics is a Robotics-as-a-Service provider with a Robotics-as-a-Service programme that can be scaled to meet the demands of the customer. The RaaS concept is a subscription-based smart programme for integrating powerful autonomous mobile robotics into warehouse operations. It enables a shift in capital expenditures towards artificial intelligence-assisted automation.

Through a variety of traditional and capital-intensive automation solutions, Locus Robotics-as-a-Service helps to minimise operational costs as well as technical barriers.

Beetl Robotics
With competence in cloud networking, computer vision, robotics, artificial intelligence, and mechanical design, Beetl Robotics is known for providing cloud robotics solutions.

This Robotics-as-a-Service company offers a variety of robots for various tasks, including a robotic poop-scooper and a robotic lawnmower-scooper.

The 20th Party Congress and the crowning of Xi Jinping

The 20th National Party Congress of the Chinese Communist Party (CCP) commenced on 16 October and will run for seven days. The Congress takes place every five years and is the most important political event in the People’s Republic of China.To get more news about 20th party congress china, you can visit shine news official website.

At the Congress the CCP General Secretary, currently Xi Jinping, presents a work report, outlining progress during the previous five years and goals for the next five. The documents are an authoritative insight into the Party’s evolving priorities and strategic goals.

The most important function of the Congress is to oversee the peaceful transition of leadership at the top ranks of the party. This includes the 205 full members and the 171 alternate members of the Central Committee, the 25 members of the Politburo and, most importantly, the currently seven members of the Standing Committee of the Politburo. These are the people who run China — the bureaucracy, key economic institutions, the military and the domestic security apparatus.

Officially, the Party Congress of 2296 delegates elect the Central Committee, which in turn elects the Politburo and the Politburo Standing Committee. In practice the selection flows in the other direction as the slate of candidates nominated for ‘election’ rarely exceeds the number of positions vacant. The top men of the party (there are no women on the Politburo Standing Committee) choose their deputies.

But who chooses the top men — including the General Secretary, the most powerful man in China?

In the wake of the Tiananmen massacre and political crisis Deng Xiaoping chose Shanghai conservative Jiang Zemin to run the Party and the country. Before his death Deng also anointed Hu Jintao as Jiang’s successor and Party elders groomed him for future leadership. But by the time Hu took the reins Deng and other revolutionary elders had died. It is believed that Xi Jinping, the first post-Deng leader not chosen by Deng himself, was chosen through a process of consultation among retired leaders and serving Politburo members. The Party also claimed that it conducted a straw poll of central committee members before choosing Xi and other top leaders. But the process of Xi Jinping’s rapid elevation to the top ranks remains something of a mystery.

What is not a mystery is Xi Jinping’s intentions to break with Party norms and formally install himself as Party boss for a third five-year term at this week’s Party Congress. This comes on the back of a second term in which Xi conspicuously failed to appoint a potential heir to the Politburo Standing Committee. Xi has dispensed with the practice of straw polling of party officials which was used as a reference for choosing Politburo members. Xi now handpicks his Politburo. To ensure his personal domination at the apex of Party power, Xi is not expected to appoint a successor at this week’s Congress, and that would confirm Xi has a fourth term in mind, and maybe even a fifth.

Xi’s manoeuvrings, long in the planning, threaten to upset a bedrock of CCP durability — that is, the Party’s ability to ensure a peaceful and regular transfer of power. His domination also presents a host of potential challenges for China, as Carl Minzner points out in this week’s lead essay.

For Minzner, China’s slide back toward personalistic rule rings alarm bells. First, the quality of decision making deteriorates as sycophants increasingly tell the Supreme Leader what he wants to hear and critical voices are sidelined. Second, the purge of rivals and rival factions does not bring an end to political intrigues: on the contrary, ‘court politics multiply and infect day-to-day operations of the bureaucracy. Officials start to rapidly fall in and out of favour with the paranoid, declining ruler. State policies begin to careen wildly as aides pander to his whims and smear their rivals’.

Minzner notes the perils of strongman rule from China’s own past. Dominant leaders are prone to fomenting internecine conflict when support for their rule wanes, as Mao Zedong did in launching the Cultural Revolution, devastating China’s society and economy in the process. And the inevitable deterioration under one-man rule can of course be seen in Russia under Vladimir Putin. Minzner notes that Putin has had a full quarter-century to ruin Russia, whereas Xi Jinping has so far had only 10 years at the top. The world must prepare itself for another decade of Xi Jinping as China’s supreme leader.