User blogs
What Is a Trading Account?
A trading account can be any investment account containing securities, cash or other holdings. Most commonly, trading account refers to a day trader’s primary account. These investors tend to buy and sell assets frequently, often within the same trading session, and their accounts are subject to special regulation as a result. The assets held in a trading account are separated from others that may be part of a long-term buy and hold strategy.To get more news about Trading Account, you can visit wikifx.com official website.
Basics of Trading Account
A trading account can hold securities, cash and other investment vehicles just like any other brokerage account. The term can describe a wide range of accounts, including tax-deferred retirement accounts. In general, however, a trading account is distinguished from other investment accounts by the level of activity, purpose of that activity and the risk it involves. The activity in a trading account typically constitutes day trading. The Financial Industry Regulatory Authority (FINRA) defines a day trade as the purchase and sale of a security within the same day in a margin account. FINRA defines pattern day traders as investors who satisfy the following two criteria:
Brokerage firms can also identify clients as pattern day traders based on previous business or another reasonable conclusion. These firms will allow clients to open cash or margin accounts, but day traders typically choose margin for the trading accounts. FINRA enforces special margin requirements for investors it considers to be pattern day traders.
Opening a trading account requires certain minimum personal information, including social security number and contact details. Your brokerage firm may have other requirements depending on the jurisdiction and its business details.
FINRA Margin Requirements for Trading Accounts
Maintenance requirements for pattern day trading accounts are considerably higher than those of non-pattern trading. The base requirements of all margin investors are outlined by the Federal Reserve Board’s Regulation T. FINRA includes additional maintenance requirements for day traders in Rule 4210. Day traders must maintain a base equity level of $25,000 or 25 percent of securities values, whichever is higher. The trader is permitted a purchasing power of up to four times any excess over that minimum requirement. Equity held in non-trading accounts is not eligible for this calculation. A trader who fails to meet these requirements will receive a margin call from their broker and trading will be restricted if the call is not covered within five days.
Micro E-mini Futures from CME Group allow you to trade the same markets as Wall Street at a fraction of the cost! Practice using a free trading simulator to SIM trade the most popular & liquid futures markets including the S&P 500 & NASDAQ 100. Download Now.
How to Spot a Forex Scam
The spot forex market traded over $6.6 trillion a day as of April 2019, including currency options and futures contracts.To get more news about Forex Scams, you can visit wikifx.com official website.
With this enormous amount of money floating around in an unregulated spot market that trades instantly, over the counter, with no accountability, forex scams offer unscrupulous operators the lure of earning fortunes in limited amounts of time. While many once-popular scams have ceased—thanks to serious enforcement actions by the Commodity Futures Trading Commission (CFTC) and the 1982 formation of the self-regulatory National Futures Association (NFA)—some old scams linger, and new ones keep popping up.
Back in the Day: The Point-Spread Scam
An old point-spread forex scam was based on computer manipulation of bid-ask spreads. The point spread between the bid and ask basically reflects the commission of a back-and-forth transaction processed through a broker. These spreads typically differ between currency pairs. The scam occurs when those point spreads differ widely among brokers.
For instance, some brokers do not offer the normal two-point to three-point spread in the EUR/USD but spreads of seven pips or more. (A pip is the smallest price move that a given exchange rate makes based on market convention. Since most major currency pairs are priced to four decimal places, the smallest change is that of the last decimal point.) Factor in four or more additional pips on every trade, and any potential gains resulting from a good trade can be eaten away by commissions, depending on how the forex broker structures their fees for trading.
This scam has quieted down over the last 10 years, but be careful of any offshore retail brokers that are not regulated by the CFTC, NFA, or their nation of origin. These tendencies still exist, and it’s quite easy for firms to pack up and disappear with the money when confronted with actions. Many saw a jail cell for these computer manipulations. But the majority of violators have historically been United States-based companies, not the offshore ones.
The Signal-Seller Scam
A popular modern-day scam is the signal seller. Signal sellers are retail firms, pooled asset managers, managed account companies, or individual traders that offer a system—for a daily, weekly, or monthly fee—that claims to identify favorable times to buy or sell a currency pair based on professional recommendations that will make anyone wealthy. They tout their long experience and trading abilities, plus testimonials from people who vouch for how great a trader and friend the person is, and the vast wealth that this person has earned for them. All the unsuspecting trader has to do is hand over X amount of dollars for the privilege of trade recommendations.
Many of signal-seller scammers simply collect money from a certain number of traders and disappear. Some will recommend a good trade now and then, to allow the signal money to perpetuate. This new scam is slowly becoming a wider problem. Although there are signal sellers who are honest and perform trade functions as intended, it pays to be skeptical.
"Robot" Scamming in Today’s Market
A persistent scam, old and new, presents itself in some types of forex-developed trading systems. These scammers tout their system’s ability to generate automatic trades that, even while you sleep, earn vast wealth. Today, the new terminology is “robot” because the process is fully automated with computers. Either way, many of these systems have never been submitted for formal review or tested by an independent source.
Examination of a forex robot must include the testing of a trading system’s parameters and optimization codes. If the parameters and optimization codes are invalid, the system will generate random buy and sell signals. This will cause unsuspecting traders to do nothing more than gamble. Although tested systems exist on the market, potential forex traders should do some research before putting money into one of these approaches.
Other Factors to Consider
Traditionally, many trading systems have been quite costly, up to $5,000 or more. This can be viewed as a scam in itself. No trader should pay more than a few hundred dollars for a proper system today. Be especially careful of system sellers who offer programs at exorbitant prices justified by a guarantee of phenomenal results. Instead, look for legitimate sellers whose systems have been properly tested to potentially earn income.
Another persistent problem is the commingling of funds. Without a record of segregated accounts, individuals cannot track the exact performance of their investments. This makes it easier for retail firms to use an investor’s money to pay exorbitant salaries; buy houses, cars, and planes or just disappear with the funds. Section 4D of the Commodity Futures Modernization Act of 2000 addressed the issue of fund segregation; what occurs in other nations is a separate issue.
THROUGH CONDUIT GATE VALVE
YDF through conduit gate valve are designed, manufactured and tested in accordance with API 6D, ASME B16.34, and can meet 6FA six edition specification requirement. YDF through conduit gate valve have two optional structures valve “Slab gate valve”and“Expanding gate valve”.Get more news about through conduit gate valve,you can vist our website!
The Cameron GROVE G12 gate valve is a through-conduit gate valve with a cast body. The valve is fully compliant with API Spec 6D. This series is designed for standard application, but the design also is particularly suitable for projects where special materials and trims are required. The top-entry construction allows easy maintenance in a wide range of applications such as in oil and gas pipeline main valves, manifolds, station valves, pig launcher traps, and emergency shutdown (ESD). The traditional field of application is in oil and gas transmission and distribution both onshore and offshore.
Through Conduit Gate Valve is designed to satisfy the long distance transportation service of crude oil and natural gas. It is designed in accordance with API 6D with DBB function, thus valve can offer bi-directional on-off service. Our through conduit gate valves have two main series: Slab Gate Valves and Expanding Gate Valves.
If you are interested in a product that will allow you to handle the long distance transportation of oil and natural gas, you should consider taking a closer look at our Through Conduit Gate Valve, which is designed to provide bidirectional, on and off service to the installations that you have in mind. We offer two options: Slab Gate Valves as well as Expanding Gate Valves.
What you must know about our valves is that they are customizable to an extent. For example, when it comes to the body material that this product can be made of, you have the option of choosing between carbon steel, stainless steel, alloy steel and a few others. At the same time, when it comes to its design, you can opt for an optional slab or even for an expanding gate design, depending on your preferences.
You should also know that we have worked on a fire safe design and that this valve has double block as well as bleed capabilities. When you want to learn more about the different specifications of this product, you might want to consider taking a closer look at this page. You will find all the information you need right here. However, you should also consider leaving us a message with any questions that you might have.
We would be more than happy to provide a complete answer in the shortest time possible. The good news is that if you are searching for a Gate Valve Manufacturer, there is no need for you to do anything other than get in touch with our team. We have been catering to the needs of our clients in this particular market for over 15 years now and are prepared to help you with any special requests that you might have regarding our valves.
Compression Springs
The Subtil Group produces cylindrical, conical or biconical or barrel-shaped springs, with linear or progressive pitch.Get more news about Electronically Controlled Spring Coiling Machine,you can vist our website!
Compression springs or helical compression springs are torsion-stressed springs which have linear or progressive characteristics. The product is created from spring wires with round, flat, square or profiled sections.
We have a variety of powerful coiling machines available in all size ranges.
All machines are equipped with electronic measurement, control and sorting equipment. Additionally, we have equipped some machines with camera measurement technology.
We have the most modern facilities for the grinding spring ends, some with fully automatic feeding. Likewise, facilities for cold settings, hot settings and a wholly owned power control and fatigue testing equipment exist in our facilities.
Springs are manufactured in wire diameters from 0.10 mm to max. 12 mm, round and profile materials; in all spring materials and special alloys.Baudrand New Tech would like to inform all potential and existing customers that a second hand universal spring coiling machine with electronic control is now available for sale.
The WAFIOS Ful 10 machine, which is in very good working condition (see pictures and video), is able to process wire from ø 8.0mm to 16.0mm.
Nitrogen Gas Generators
Parker nitrogen gas generators produce high purity nitrogen from compressed air, eliminating the inconvenience of delivered nitrogen supplies. Nitrogen can be produced at low dewpoints from nearly any compressed air supply. Our range is designed to continually transform standard compressed air into nitrogen at safe, regulated pressures by utilizing pressure swing adsorption (PSA) technology. Our nitrogen gas generators are suitable for use in a variety of applications, serving across many of today's major industrial markets including manufacturing, tire inflation and analytical instrument applications.Get more news about jual nitrogen generator,you can vist our website!
Parker Balston Membrane HFX Series Industrial Nitrogen Generators will produce 95 to 99% pure, commercially sterile nitrogen from a standard compressed air supply at dewpoints to -58°F (-50°C)
How VPSA Oxygen Generator Work
HYT-CVO VPSA oxygen generator provides dependable oxygen supply to meet a broad range of requirements.
The CVO generator uses adsorption technology to separate atmosphere air into its two principal components - nitrogen and oxygen. Oxygen, at your specified purity, is provided to your application at the required pressure, and the waste stream (impure nitrogen, water and carbon dioxide) is vented to the atmosphere.
The CVO generator adopts Li-LSX ZMS, which maximizes efficiency and significantly reduces energy requirements, regarded as the low-cost oxygen source
Aerotech launches ACT linear actuator series
Aerotech's has unveiled its new ACT series of linear actuators, featuring ultra smooth brushless linear servomotors, sub micron level encoder feedback and heavy duty linear guide bearings. The devices are designed for demanding, high throughput/high accuracy positioning applications for parts handling, assembly, dispensing, pick and place, non contact inspection and scanning.Get more news about linear drive,you can vist our website!
Available in widths of 115, 140 and 165mm, the modular ACT series is designed to provide the capability for higher production throughput and improved accuracy in comparison to ball screw and belt driven alternatives. According to the company, it offers maximum speed to 5m/s and acceleration to 5g. It has a travel range from 100mm to 1.5m.
Users can select from a range of complete positioning systems, with price and performance matched to requirements. These include uncertified, certified or HALAR interferometer calibrated accuracy grades and a choice of power performance through a forced air cooled motor option. There are also alternative cable management systems and flexible mechanical interfacing options ranging from single and X-Y axis configurations through to multi axis systems with dual parallel axes in gantry positioning styles.
The series utilises Aerotech's direct drive U-channel linear servomotor technology, designed to bring smooth performance with no cogging due to its non magnetic forcer coil. With zero backlash and zero friction, the company claims the 320VDC linear motor permits outstanding performance, as well as smooth velocity and positioning control.
Why Some Pin Type Bead Mill Not As Fine As The ELE Pin Type Bead Mill?
The emergence of the pin bead mill has completely changed the original traditional horizontal bead mill where the fineness can only be ground to the micron level. The most fundamental reason is to increase the energy input, so that the grinding kinetic energy in the grinding chamber is greater. The rotor commonly used in the original traditional horizontal bead mill is basically a disc structure. The mechanism of grinding mainly relies on the friction of the grinding disc to drive the beads. The impact force is small. The rotor structure of the pin bead mill is a rod and nail structure. The grinding mechanism mainly depends on the percussion force of the rod pin,The instantaneous impact force is extremely large, so that the grinding medium obtains huge kinetic energy. The medium collides with each other at high speed, friction and squeezes so that the material is quickly ground fine.Get more news about pin bead mill,you can vist our website!
Of course, this is only an analysis from the difference in rotor structure. In fact, many bead mill counterparts only know one thing, but they do not know the other, and blindly imitate. Therefore, many manufacturers of "pseudo pin type bead mill" have appeared in the industry."pseudo pin type bead mil’’ is mostly just modified from the rotor structure on the basis of the original traditional disc bead mill. The original disc is simply converted into a rod pin structure, while the others are unchanged, just looking like rod-pin bead mill. But is not at all. The price is also much lower than the real pin type bead mill, but higher than the traditional disc type bead mill, and the use effect is naturally the same as that of the traditional disc type bead mill, which makes many users who have unknown reasons suffer fooled.
So many users will ask: "Why are some pin type bead mill not as fine as the ELE pin type bead mill?" Next, I will give a simple answer to this question. First of all, the kinetic energy and linear velocity should be large, which is manifested by the large motor power, large rotor diameter, and more wear-resistant materials. Secondly, the bead filling ratio is high and the bead is small, which is reflected in the design strength and precision of the machine, the more precise separation structure, and the more durable mechanical seal. This is the main reason why some pin type bead mill are not as fine as the ELE pin type bead mill. Detailed details can be further communicated with ELE sales engineer.
High Penetration China Diamond Rod Shoe
Our impregnated diamond core bits are the most commonly useful bits in the mineral exploration industry, as they have the widest range of application. The carefully selected grades of high quality synthetic diamond are distributed in the depth of impregnated bit's matrix series.Get more news about Bq Rod Shoe,you can vist our website!
Impregnated casing shoe bits are recommended for very hard and fractured formations. They can be manufactured in all series and varying impregnation heights to suit your individual requirements.
To select the right bit for the job, assess the speed and power of your drill for the size and depths of the holes to be drilled and assess ground conditions such as rock type/formation and down-hole conditions.
Size:
SINOCOREDRILL bits are available in all standard drilling sizes . Also, non-standard sized bits can be produced according to requirements from clients.
Crown Height:
SINOCOREDRILL offers crown impreg depths of 9mm, 12mm, and 16mm .The taller crown heights provide improved bit stability and reduced vibrations, enhancing bit life and performance.
Waterways:
Various waterways are available for diamond impregnated bits. Differing waterways allow for better flushing in various ground conditions and drilling systems.
Matrix:
SINOCOREDRILL impregnated bits matrices can be selected by our engineer according to ground conditions at client's work site.
Does Shipito offer fast shipping to France?
You'll save money over other services because Shipito has the most shipping options into France. Customers in France love that their US address with Shipito allows them to get great deals on electronics, clothes, make-up, auto accessories, cellphones, perfume and more! Customers in France that choose a premium account can also get access to our US sales tax free warehouse in Oregon. This is additional savings on purchases as you don't pay US sales tax on purchases from US websites.Get more news about France Shipping,you can vist our website!
Simply use your Shipito address as your mailing address whenever you buy items on US websites. Have your items shipped to Shipito and we will notify you when your items arrive. Then log in the Shipito website, fill out the US customs form, select a carrier and pay to ship your items to France.
Shop in the US. Send your purchases to your free US address at Shipito. Log in, fill out your customs form and select the carrier you wish to use to ship to your home or business.
Be sure to properly declare you items for the fastest processing through customs. Customers can also make a special request to have pictures taken of their items in the box upon arrival so they can inspect the item to ensure its what they ordered or to survey for damage.
We offer many fast shipping options from the US to France, including exclusive Shipito carriers. No other service gives you more choices when shipping packages from the US to France!
With your Shipito account you can purchase the latest shoes, clothes, fashions, electronics, make-up, automotive parts or anything else you need from US websites.
Do you have employees that can help me in my language?
Yes, at Shipito we have customer service representatives ready to help you in Russian, English, Portuguese, French, German, Spanish, Turkish, Arabic, Hebrew, Japanese, Czech, and Chinese. We can answer any questions you might have about how long it will take your package to ship from the US to France, how many US goods you can ship, what import taxes you may need to pay when shipping from the US to France, what is legal to ship to France, and more.
Can I buy perfume and cologne from the US and ship to France?
It's cheap and easy to ship perfume or cologne to France for gifts or personal use with Shipito. Please check our Perfume page for specifics on your country.
The 9 Best Powder Cleansers for a Customizable Cleansing Experience
True story: Not all face wash comes in liquid form. If you haven’t tried a powder cleanser yet, get on it. Long popular in Asia, this format is becoming more and more popular stateside and offers several unique attributes compared to its liquid counterparts.Get more news about Enzyme Powder Tosowoong,you can vist our website!
“They’re a great two-in-one, both cleansing and offering gentle physical exfoliation at the same time,” says Dr. Fatima Fahs, a board-certified dermatologist in southeast Michigan and the creator of the Dermy Doc Box. Because they’re so gentle, they’re a prime choice for sensitive skin, even more so given that they also contain fewer potentially irritating preservatives, she adds. (Because they don’t contain any water, they’re less likely to harbor bacterial growth and, as such, don’t need preservatives.)
You can easily customize how "scrubby" you want the formula to be based on how much water you add, not to mention that they’re TSA-friendly and a great choice for travel, notes Dr. Fahs. In short, it’s worth hopping aboard the powder cleanser bandwagon.
One of Dr. Fahs’s top picks, this is a classic that recently got a revamp. It’s now available in the classic variant and three other versions: deep, gentle, and calming. Still, you can’t go wrong with the OG. It relies on nonabrasive rice bran (that’s the powder part) and lactic acid for just a touch of gentle chemical exfoliation.1 It’s extremely fine-milled and so silky that it’s hard to believe it’s exfoliating at all, but the super-smooth, glowing, and even skin you’ll see after using it is proof positive.
For some reason, powder cleansers haven’t made their way to the drugstore yet, making this option all the more noteworthy. It relies on both rice and oat powders as well as sea salt for physical exfoliation purposes, though it also contains kaolin clay, a great ingredient for absorbing excess oil.2
Yes, this is Kristen Cavallari’s new beauty line. And yes, the whole line is pretty good, but this powder cleanser is one of our favorites. Not only is it super clean, but the brand also abides by Credo’s list of banned ingredients, which is one of the most extensive lists of harmful ingredients. It also foams beautifully (not always the case with powder cleansers). It’s another rice-bran-based option and contains exfoliating papaya enzymes, too.3 Bonus points for the sifted top dispenser, which minimizes the likelihood of spills.
While powder cleansers may not be the first thing you think of for dry skin, this one, another of Dr. Fahs’s recommendations, is a particularly good option for the drier crowd. Credit the addition of hydrating argan oil, which ensures this leaves your skin feeling smooth, soft, and clean but never stripped. (An attribute confirmed by happy reviewers.) To that point, it transforms into almost a milk-like texture when mixed with water.
Because all cleansing powders gently exfoliate, they’re a good choice for helping to boost radiance and improve overall tone. However, this one is an especially great choice if you’re looking to get extra glowing results. Credit the addition of vitamin C, which is not only a great antioxidant and collagen-booster (a boon for those with more mature skin) but also is one of the best ingredients for helping to boost radiance.4