User blogs

Samsung starts development of ‘Galaxy Ring’

Samsung has started the development of a new smart device that will come in the form of a ring, TheElec has learned.Get more news about samsung used mounter wholesale prices,you can vist our website!

The so-called Galaxy Ring will use circuit boards made by Japan’s Meiko, sources said.Printed circuit boards are usually developed first for electronic devices, followed by the components that will be mounted on them.

Smart rings are wearable devices that customers can wear like a ring.They contain various sensors that can collect the health data of wearers and send them to their smartphones.

Finland’s Oura offers smart rings that come with various sensors, a battery, and Bluetooth support. The company’s rings weigh between 4 to 6 grams and can be used for up to a week with 80 minutes of charging, according to the company.

While Samsung has started the development of the Galaxy Ring, it is yet uncertain when it will actually launch the product.It will likely determine if it will mass produce the rings after reviewing the prototype it makes with Meiko.

As smart rings are more tightly bound to the wearer’s body compared to smartwatches, this could mean they can offer more accurate measurements.

However, blood flowing through fingers are weaker than those on wrists and a ring that too tightly wraps around fingers can cause errors in measurement.Meanwhile, Samsung is also preparing to launch an extended reality headset next year.

The company originally planned to launch it as early as late-2023 but has delayed this as the display it used falls behind in quality to Apple’s OLED on silicon used in Vision Pro. The lack on contents for the device was another factory in the postponement, sources said.

What are FFC (flat flexible cables)?

FFC (flat flexible cable) is a ribbon-type cable used to connect PCBs. It is typically used in laptops, cellphones, and other high-density electronic applications. FPC (flexible printed circuit) is sometimes used to refer to FFCs, but one important difference is that FPCs incorporate components, while FFCs are typically straight connections without components.Get more news about Ffc Cable Manufacturer,you can vist our website!

FFCs became the PCB standard interface in the 1970s. The cable consists of a plastic film that contains multiple flat metallic conductors bonded to one surface. Thin rectangular copper conductors are laminated between two layers of polyester insulation. Each end of the conductors is left uncovered and then tin plated to make electrical contact with the connector. The ends of the cable are sometimes reinforced with a stiffener for easy insertion or strain relief. This makes the cable slightly thicker at the ends.

FFCs are suited to high-flex applications because they often take up less space, offer greater flexibility, and are more flexible than round cables, which are wrapped by different materials. The wires in FFC are protected individually.

Initially, termination technology was either direct solder (a permanent connection for low-cost applications) or crimped contacts (a separable connection for high-end pluggability). ELCO developed the first card edge style connector in 1986 to mate directly to the FFC. This low insertion force (LIF) type connector provided simple and reliable mating and unmating of the cable to the printed circuit board. ELCO’s 8370 Series became an industry standard for cost-effective FFC terminations. In 1987, ELCO introduced the first zero insertion force (ZIF) connector, Series 6200, which provided increased mating and unmating cycles.

The number of conductors (pins) can range from just a few to more than 100.
Pitch – Many pitches are available, but the most common are 0.500 mm, 1.00 mm, and 1.25 mm. Custom pitch and multiple pitch FFC may also be available.
Type – Some cables (described as Type 1 by Würth Elektronik or Type A by Molex) have the exposed contacts on the same side at each end. Other cables (labeled Type 2 or Type D) have the exposed contacts on opposite sides of the cable.
Exposure length refers to the length of the electrical contact exposed at that termination of the cable.
Stiffener – Extra material attached on the opposite side of the exposed length of the cable to facilitate ZIF or LIF.

Allflex Reports Ear Tags Are Back in Full Production Mode

Bottlenecks and hurdles have been a constant challenge producers have had to work around since the pandemic. Supply shortages, including the struggle of locating ear tags, might seem like a small problem, but the need for identification is essential and the backlog of ear tags has been an issue producers from coast to coast have had to try to work around.Get more news about Lf Rfid Ear Tags,you can vist our website!

California dairy producer Darlene Lopes felt this frustration. Lopes and her husband, Paul, along with their son, Tony, manage 4,000 Holstein cows, 2,500 head of Angus-Crossbred cattle and farm 2,100 acres in the Central Valley.

With hundreds of calves on milk, identification is a must for Lopes. Regardless of the size of the operation, identification is vital in tracking cattle performance and is used to make management decisions for all dairy farmers.

As Lopes waited on her Allflex tag order, her employees had to scour to find whatever they could to identify animals.

“We gave calves a temporary blank, different color tag, really whatever we could find,” she notes. “And of course, there’s some employee error when they’re writing the numbers down instead of the pre-printed ones.”

Lopes also ran out of RFID tags, which became a problem considering all their crossbred calves are custom raised at an offsite ranch that requires an RFID tag.

“The state veterinarian gave us 1,000 tags,” Lopes shares. “If he hadn’t done that, we would not have been able to comply with state rules.”

Once Lopes's tag order arrived, her staff had to go back and re-tag all the cattle.

“We purchase the sets that come with RFID that are already set to that particular [tag] number, so we had to delete all of those and assign them a new RFID number,” Lopes says.
The cause of the initial delay in orders stems from the movement of the Allflex Identification business to the Merck ERP (SAP) in 2021. The Omicron variant surge earlier that year impacted both workforce availability and supply of raw materials, making this situation significantly worse.

“Merck Animal Health has invested in expanded manufacturing capacity to ensure a continued reliable supply of Allflex ear tags,” Paul Koffman, executive director of Livestock Technology Solutions, North America for Merck Animal Health, shares.

Koffman shares that they are pleased to report Allflex ear tags from Merck Animal Health are in full production and back up to pre-COVID production levels.

Perimeter LED Display: Everything You Need to Know

Perimeter LED displays have become an integral part of the electrical industry, particularly in the realm of LED screens. In this article, we will delve into the world of perimeter LED displays, exploring their significance, functionalities, and applications. Whether you are a professional electrician or simply interested in understanding this technology, this guide will provide you with valuable insights.Get more news about Led Perimeter Display,you can vist our website!
1. What are Perimeter LED Displays?
Perimeter LED displays are large-scale screens commonly seen in sports stadiums, arenas, and outdoor events. These displays are designed to surround the playing field or event space, offering high-resolution visuals to captivate the audience. By utilizing numerous LED panels, these displays can showcase live videos, advertisements, scores, and other engaging content.
2. Key Features:
- High-Resolution: Perimeter LED displays offer exceptional image quality, ensuring clear visuals even in bright outdoor environments.
- Weatherproof: These displays are built to withstand various weather conditions, including rain, wind, and extreme temperatures.
- Brightness Control: They feature adjustable brightness levels, allowing optimal visibility regardless of the time of day or ambient lighting.
- Easy Maintenance: Perimeter LED displays are designed for easy installation, maintenance, and panel replacement, ensuring minimum downtime.
3. Benefits of Perimeter LED Displays:
- Engaging Advertising: These displays provide an immersive advertising platform, capturing the attention of the audience and maximizing the impact of brand messages.
- Revenue Generation: Perimeter LED displays offer opportunities for advertising revenue through partnerships with sponsors and advertisers.
- Enhanced Fan Experience: By showcasing live video feeds, replays, and interactive content, these displays enhance the overall spectator experience.
- Dynamic Content: They enable real-time updates, such as live scores and social media feeds, keeping the audience informed and engaged.
4. Applications:
- Sports Events: Perimeter LED displays are commonly used in sports events to showcase advertisements, live scores, player statistics, and instant replays.
- Concerts and Festivals: They create an immersive visual experience for concert-goers, displaying live footage, lyrics, and artist information.
- Trade Shows and Exhibitions: Perimeter LED displays serve as attention-grabbing marketing tools, showcasing product demos, brand messages, and interactive content.
- Public Gatherings: These displays can be utilized in outdoor public spaces to share important announcements, public service messages, and event information.

Brake Safety Week begins, focusing on linings and pads

Brake Safety Week is officially underway, as enforcement teams in Canada, Mexico and the U.S. gather detailed brake-related inspection data from Aug. 20 to 26.Get more news about truck brake lings manufacturers,you can vist our website!

General brake system inspections and violations will be tallied along with data specific to brake linings and pads, which are a special focus this year.

Inspectors will report details such as brake lining and pad cracks or voids, wear, or contamination.Some brake lining and pad issues are not automatically out-of-service violations, but can still affect carrier safety ratings, the Commercial Vehicle Safety Alliance (CVSA) says.

Canada’s commercial vehicle inspectors checked 1,975 vehicles during Brake Safety Week in 2022, placing 17.8% out of service for brake-related violations – above the North American average of 13.3%.

Vehicles that pass a Level 1 or Level 5 inspection will be eligible to receive a CVSA decal that is valid for up to three months, showing inspectors that the equipment has recently passed its inspection.

The global switchable smart film

The future of the global switchable smart film market looks promising with opportunities in the architecture, automotive & transportation, consumer electronic, and power generation markets. The global switchable smart film market is expected to reach an estimated $6.8 billion by 2028 with a CAGR of 10.5% from 2023 to 2028. The major drivers for this market are increasing adoption of smart films in the building and construction industry, growing trend of green and energy-efficient buildings, and rising penetration of smart films in automotive industry as it helps is reducing the glare of the sun.Get more news about smart film manufacturers,you can vist our website!
The analyst forecasts that smart films for lamination will remain the largest segment over the forecast period due to growing demand for smart windows in the building & construction industry as it is flexible and lightweight in nature.
• Within this market, automotive & transportation is expected to remain the largest segment due to increased demand for automobiles in developing nations and rising application of smart films in panoramic windows and sunroofs to reduce solar heat gain.
• Europe will remain the largest region during the forecast period due to increasing regulations to make vehicles fuel-efficient and reduce CO2 emissions from vehicles in this region.
Features of the Switchable Smart Film Market
• Market Size Estimates: Switchable smart film market size estimation in terms of value ($B)
• Trend and Forecast Analysis: Market trends (2017-2022) and forecast (2023-2028) by various segments and regions.
• Segmentation Analysis: Switchable smart film market size by various segments, such as by type, technology, application, and region
• Regional Analysis: Switchable smart film market breakdown by North America, Europe, Asia Pacific, and the Rest of the World.
• Growth Opportunities: Analysis on growth opportunities in different by type, technology, application, and regions for the switchable smart film market.

Truck spare parts: most frequently replaced parts

One might think heavy-duty truck parts are as tough as they are robust and will last forever. However, as with everything, if a truck is well maintained, it will have a longer useful life but will require replacing eventually.There are numerous truck parts from the smallest bolt to the water pump to the wiper blade, but what are the most frequently replaced spare parts?Get more news about truck spare parts,you can vist our website!

Top commonly replaced truck spare parts

Knowing the most commonly truck replacement parts can help you keep a close monitoring on their performance. It is important to take in mind that every truck has its own maintenance needs, so a proper assessment of the truck parts must decide which ones need replacement (or don’t).
1. The batteries

General wisdom says that batteries in trucks should be replaced every three to four years. However, factors like temperature, climate and driving habits can affect the battery’s lifespan and leave the truck needing a new one before the three-year mark. Weak batteries do not always show warning signs, it is important to inspect them regularly.One of the most recommended maintenance practices is not to use the electrical components of the vehicle when the engine is not started.

2. The clutch parts

The clutch, in a manual transmission system, allows the driver to smoothly change gears, by acting as a mechanical link between the engine and the gearbox. Therefore, it is a key component to disconnect the engine from the transmission system.

A damaged clutch could cause extensive damage on the truck’s transmission, which would result in poor truck performance. Unlike passenger cars, trucks and industrial vehicles experience clutch failure due to clutch discharging and overloading. To prevent premature replacement of this component, smooth driving and effective maintenance must be in place.

3. The tires

Probably the most important safety features of a vehicle are the brakes and tires.Selecting the right tire profile, checking tire condition and age, and checking its tread depth and pressure constantly will ensure that the tires remain in perfect conditions.

When tires start wearing down to the end, they lose their grip on the road and make your vehicle less safe. Also, be sure to get your tires rotated regularly to even maximize their life.

Remember to check the inflation pressure when the tires are cold, it increases automatically when the tire is warm.

4. The brake pads

Without brakes, a truck has no control whatsoever. Brake pads are a core component of the truck’s breaking system. And they tend to wear out, requiring more and more replacements as the trucker gets bigger. This is because larger trucks take more brake power to slow down and stop.

On most heavy-duty vehicles, replacement is expected every 3 to 5 years. However, this largely depends on driving style, driving paths and the amount of stop-and-go-traffic the truck drives in. Avoiding fast stops has been shown to extend brake pads life, but regular checks should always be in place.

Zinc Stearate Sandpaper: A Revolutionary Product In The Market

For years, sandpaper has been an essential tool in the woodworking industry. It is used for cutting, smoothing, and shaping various kinds of materials, including wood, metal, and plastic. The primary purpose of sandpaper is to remove surface defects and rough edges. However, there has been a new addition to the range of sandpapers available in the market - the zinc stearate sandpaper.Get more news about Zinc Stearate,you can vist our website!

Zinc stearate is a compound derived from stearic acid and zinc. Stearic acid is a saturated fatty acid commonly found in animal and vegetable fats, while zinc is a mineral with various uses, including the manufacturing of batteries, alloys, and fertilizers. The combination of these two substances results in the creation of zinc stearate, a white, powdery substance that has numerous industrial applications. In sandpapers, zinc stearate is added to the abrasive coating, which increases the life and durability of the sandpaper.
Zinc stearate sandpaper has several advantages over traditional sandpaper. It is popularly known for its anti-clogging properties, which reduces the build-up of dust and debris on the abrasive surface of the sandpaper. This results in a smoother finish and a longer life of the sandpaper. Additionally, zinc stearate sandpaper doesn't overheat the material being worked on, which makes it an ideal choice for grinding and sanding at high speeds.

With the growing demand for zinc stearate sandpapers in the woodworking industry, manufacturers have started producing them in various grits and sizes. They are readily available both online and offline, making it easier for consumers to purchase them.

In conclusion, zinc stearate sandpapers are a revolutionary product that is changing the game in the woodworking industry. They offer several advantages over traditional sandpapers, and with the increasing demand for them, they are becoming more affordable and readily available. If you're on the lookout for the perfect sandpaper for your next DIY project, you should definitely try zinc stearate sandpaper.

Paris to ban e-scooters from September

Paris will ban electric scooters from September 1, the French capital's mayor said, after the public voted to remove them from the streets, however e-scooter operators said on Monday they hoped to stop the plan.Get more news about eva electric scooter bag case with multiple compartments,you can vist our website!

The e-scooter ban won 89% of the votes according to the city hall Twitter account in what was billed as a rare "public consultation" that prompted long queues at ballot boxes around the city. However turnout in the referendum was low at 7.46% of registered voters.
From September 1, there will be no more electric scooters for rent in Paris," she told a news conference late on Sunday.

Scooter operators pointed to the low voter turnout and said they hoped Hidalgo would seek a compromise.

"We remain hopeful that we can continue to work with Mayor Hidalgo to adopt sensible regulations instead of a ban on e-scooters, and avoid a step backward for Paris," a spokesperson for Lime said on Monday.A spokesman for Dott said the referendum was "heavily impacted by very restrictive voting methods" which led to an extremely low turnout heavily skewed towards older age groups.

French Transport Minister Clement Beaune, seen as a possible contender for the mayor's post in 2026, said on BFM television the vote was "a massive democratic flop".

Electric scooters accessed through smartphone apps have operated in Paris since 2018, but following complaints about their anarchic deployment, Paris in 2020 cut the number of operators to three.It gave them a three-year contract, required that scooters' speeds be capped at 20 km/hour and imposed designated scooter parking areas, similar to restrictions being imposed in other cities worldwide. The current contracts run until September.

Operators had offered further regulations, including checking users were over 18, fixing licence plates so police could identify traffic offenders and limiting to one passenger.

In 2021, 24 people died in scooter-related accidents in France, including one in Paris. Last year, Paris registered 459 accidents with e-scooters and similar vehicles, including three fatal ones.

"In my work, we see a lot of road accidents caused by scooters, so we really see the negative effects," general physician Audrey Cordier, 38, told Reuters after voting against the scooters.

WHOLESALE DOUBLE SIDED TAPE
Are you laying carpet or mounting fixtures to a wall and need heavy duty double sided tape? You can find an appropriate solution for your particular needs at PowerPak Packaging. Whether you want to join fabrics, mount nameplates, lay carpets or fix and assemble photos, our bulk double sided tape is suitable for various applications.Get more news about double sided pet tape in china,you can vist our website!

FIND A TAPE TO SOLVE YOUR PROBLEMS
When you buy double sided tape from PowerPak Packaging, you can expect it to have heavy duty adhesive properties as well as resistance to temperature, chemicals and other factors. You’ll find various wholesale double sided tape options in our range, including:

Double Sided Foam Tape – A synthetic rubber adhesive for mounting fixtures and sealing.
Double Sided Tissue Tape – A high strength adhesive resistant to heat, chemicals, plasticisers and aging, often used for joining fabric, nameplate mounting, and more.
Double Sided Cloth Tape – A hand tearable tape used for carpet laying and industrial applications.
Double Sided Polyester Tape – Useful for joining most materials with no special training or equipment required.
BUY DOUBLE SIDED TAPE TODAY
The double sided tape suppliers at PowerPak Packaging can help you get what you need for your specific applications. Contact us at your earliest convenience for helpful advice, or order online for prompt delivery to Perth and Adelaide.