User blogs

IFAK V2 Refill Supply Kit

I consulted with medical professionals and combat lifesavers to build this kit. I stand by and produce only the products that I use myself as a soldier. Military grade components in this IFAK refill kit made for civilians, first responders, and military. Anyone can save a life with this Individual First Aid Kit. Civilians, Outdoor Enthusiasts, Teachers, First Responders, and Military Personnel. Everything in this refill med kit is geared toward controlling bleeding, dressing the wound, packing the wound, preventing infection, opening airways, and shock prevention until first responders arrive. Z-Fold Compressed Gauze to pack wound, NPA Nasopharyngeal Airway to open airway, Combat Tourniquet to stop bleeding, Israeli Compression Bandage to control bleeding, Chest Seal to close sucking chest wound, Trauma Shears to cut clothing, Antiseptic Wipes to prevent infections, First Aid Bandages for cuts and scrapes, and much more included! ZERO risk purchase and 100% Satisfaction Guarantee.To get more news about quickclot combat gauze, you can visit rusuntacmed.com official website.

The Elite IFAK has been specifically designed by EB Military to hold materials required to respond to haemostatic emergencies. Items are held securely in place by elasticated strapping and a full length zip allows for the pack to be folded open, fully exposing the contents for easy access.

A system of quick release buckles, hook & loop tapes and elasticated strapping allow for the pack to be securely attachment to a leg and prevents it moving or slipping, even when a user is running.
This Individual First Aid Kit (IFAK) Pouch was originally designed to provide soldiers with a set of compact, easy-to-carry tools to treat battlefield injuries. This Pouch would normally house first-aid items to treat shrapnel wounds and other injuries, but this one's empty…and waiting for you to determine its purpose. Use it to carry binoculars or game calls, store travel accessories, or haul whatever items you need within easy reach. Also includes the matching Tourniquet Pouch (also empty) for a one-two punch of versatile gear-hauling potential.

Best Compact IFAK: New Blackhawk Foundation Rapid-Deployment Kit

One of my favorite courses I attended during my time in the U.S. Army was the Combat Lifesaver Course (CLS). Of all the skills I learned throughout my enlistment, the CLS course is arguably the most practical for civilian life. The CLS course isn’t as in-depth as the training for a medic or even a first responder/EMS course, but we learned the basics to keep someone alive long enough for proper medial care. The CLS course revolves primarily around the individual first-aid kit, or IFAK, like the Blackhawk Foundation Series IFAK featured in this article.To get more news about hemostat dressing, you can visit rusuntacmed.com official website.

IFAKs come in many different shapes and sizes, but I am a big fan of this Blackhawk Foundation Series IFAK for general civilian everyday carry (EDC). It’s compact enough to easily conceal, and it’s designed for rapid access in an emergency. Despite its size, I can pack the minimum medical essentials I consider necessary for an everyday carry IFAK. Before we get more into the Blackhawk IFAK, let’s break down some realistic scenarios why one might want to carry a compact IFAK on a normal day.
First, it’s important to remember the primary role of an IFAK, which is clearly stated in its description — Individual. An IFAK should be set up first and foremost for the individual carrying it. That’s not to say you should be stingy with your medical supplies if you come across someone in need. But, much like a drowning man pulling under the person trying to save him, you need to be able to take care of yourself before you can worry about helping others. Don’t confuse the role of an IFAK with a bigger medical kit set up to care for others.

An EDC IFAK is also going to be quite different from a combat IFAK. Those are generally bigger and designed to carry more medical supplies, and they’re not practical for concealed carry. It’s also highly unlikely you will face as extreme a situation as extended combat in civilian life, so it’s reasonable to sacrifice capacity for concealability and comfort for general everyday carry.

For those who conceal carry a pistol every day, like me, the first consideration for a compact IFAK is an injury during a defensive gunfight. There are countless situations where one can win a defensive fight but still become injured. Gunshot wounds are extremely traumatic, but provided one hasn’t been shot directly in the heart or brain, they can be surprisingly survivable with immediate medical care.

While a gunshot wound is often the first use-case scenario when I consider using my IFAK, it’s one of the most unlikely scenarios I’d face. As long as you’re not an active gang member, it is incredibly rare to be injured by gunshot in the U.S., despite what the media reports. What does happen every day are vehicle crashes, heavy machinery accidents, worksite accidents and dozens of other scenarios where one could face an injury that requires more than a basic first-aid kit. Even if you don’t carry a firearm for self-defense, a compact IFAK could still save your life in any number of situations.
As long as air can enter your lungs, you’re breathing properly and you don’t have excessive blood leaving your body, there is a solid chance you are currently alive. However one might be severely injured, if you can control the ABCs right away, then there is a high probability of survivability once you get to a doctor. Fortunately, it doesn’t really take many supplies to control the ABCs during a severe injury.

Let’s start with circulation. If you are operating a chainsaw, heavy equipment or are near anything that could sever an artery, you are a fool to do so without a good tourniquet. From combat and car crashed to loggers and construction sites, modern CAT tourniquets have saved many lives, and a minimum of two should be in your IFAK. Most experienced EMS personnel will tell you that if you need to apply one tourniquet, then it’s likely you will need to apply two. Even if you have severe bleeding on just one appendage, it can often take two tourniquets to properly stem the bleeding. Tourniquets can stay on for hours before you need to worry about permanent limb damage, so when it doubt, apply a tourniquet.

What is over-molding?

Over-molding is a unique molding process that can combine multiple materials into a single part or product. It is commonly used to produce consumer electronics and industry equipments. SuNPe provides plastic overmold plastic, plastic overmold metal, rubber overmold plastic services for prototyping and production.To get more news about 2k injection molding, you can visit asm-mold.com official website.
What kinds of Over-molding can do at SuNPe?
The over-molding process produces chemically bonded parts made using various materials. Depending on the materials, we can make the following types of over-molding:

● Plastic Over Plastic - The substrate is rigid plastic. Then another rigid plastic is molded onto or around the substrate. In this way, it can help to improve the ergonomics of a product, manufacture the product in different colors and resins.
●Rubber and plastic overmolding - Different with plastic over plastic, the second mold plastic rubber, not rigid plastic. It is not only can combine different colored parts, also can fixing of rubber grips onto the stiff handle, which can add the flexibility to rigid parts, help to realized the functional of the parts.
The first substrate is metal, then rigid plastic will be molded around the substrate. This is often used for insert installing, which also called inserts over-molding.
Compared with insert molding, the second plastic changed from rigid plastic to rubber. The first metal part can be produced by formed, CNC machining, die casting.
Vacuum Casting - When the product is in the premise research and development and testing stage, the number of required is not large, vacuum casting is the most affordable way to do over-molding, which is suitable for prototyping projects under 100 pieces.
Injection molding - For low-volume production and mass production projects, it has obvious benefits on time and cost, which can bring the products to the market in a short time.

What Is The Process Of Plastic Mold Injection Molding?

Making Mold is a relatively complicated thing, especially for precision molds, there are many processes, and the whole process involves many problems. So what is the specific process of making plastic mold?To get more news about 2k injection molding, you can visit asm-mold.com official website.

The specific process of plastic injection molding is as follows:

1. Drawing design. Drawing design is the first step in making mold. It is necessary to communicate well with customers and complete the design of drawings according to customer needs.

2. Material selection. According to the nature of the product, choose the best material to make the mold. This step is directly related to the quality of the injection molding after the mold is formed, so it must be done well.

3. Mold making. The machining of the mold includes CNC machining, EDM machining, wire cutting machining, deep hole drilling and so on.

4. Mold trial and repair. Although the mold design is carried out under the expected process conditions when selecting molding materials and molding equipment, people's understanding is often imperfect. How is the quality. After the discovery is always made, repair the mold to eliminate errors. There are many types of bad phenomena in plastic parts, and the reasons are also very complicated. There are reasons for the mold and the reasons for the process conditions. The two are often only combined. Before repairing the mold, a detailed analysis and research should be carried out according to the actual situation of the bad phenomena in the plastic parts, and the remedial methods should be proposed after finding out the reasons for the defects of the plastic parts.

5. Organize data archives. After the mold test is successful, it can be put into production. If it is not in production, more molds should be protected, and the relevant technical parameters should be organized and archived.

Injection Molding Defects: Parts Sticking in the Mold

For a processor, finished parts sticking in the mold can be an absolute headache. The parts may be picked by a robot, ejected off the mold to fall onto a conveyor system, or hand-picked by an operator after each cycle. Parts sticking in the mold can cause massive downtime not to mention mold safety alarms if the part remains in the mold for the next cycle. There are ways to fix this issue and we will cover them here under three categories; Machine, Mold, and Material.To get more news about 2k injection moulding, you can visit asm-mold.com official website.

1.) Machine: Within the process parameters a part sticking in the mold usually means that the part is over-packed. If this is the case the processor can try decreasing injection or hold pressures, reduce shot volumes, or decrease screw forward time.

2.) Mold: One cause for parts sticking relating to the mold could be scratched or marred surfaces in the cavity. For this you would want to remove the blemishes and polish the mold surface. Insufficient draft angles could also be an issue. You want a minimum draft angle of 0.5 degree per side. The greater the draft angle the easier the part will be to eject. The issue could also stem from a poor ejection mechanism. In order to solve this, options include installing new ejector pins or increasing the number of ejectors per cavity.

3. )Material: As far as material is concerned, there could be inadequate lubrication in the resin causing the parts to stick. In this case, you could incorporate using a mold release agent or mix a small percentage of lubricant to the resin itself before processing.

IV Techmould invest in two new injection molding machines

IV Techmould has just installed two brand new 2K 160T Engel injection molding machines to support increased demands from current customers and to support potential new business. The machines have 160 tonnes of clamping force and Engel's W-version for the injection units to minimize the machine's footprint and increase accessibility around the machine, and also Engel's unique tie rodless technology for maximum flexibility in casting dimensions. They are also equipped with Engels ECODRIVE for excellent energy efficiency and low noise.To get more news about 2k mold, you can visit asm-mold.com official website.

CEO Fredrik Carlsson comments on the investment:

“We have been running at a very high level of utilization in our 2K injection molding machines for quite some time, and when some existing customers indicated higher volumes from 2017, we made the decision to purchase two new Engel 2K injection molding machines to increase capacity to meet increased requirements for some of our existing businesses, but also to free up capacity for new 2K injection molding. "IV Techmould has long and extensive experience in 2K injection moulding.

Fredrik Carlsson continues:

"We are investing further in our 2K injection molding capacity by adding two brand new Engel 2K injection molding machines to our already existing 2K injection molding machines, this means that close to 20% of our total machine capacity at IV Techmould is 2K injection molding operations. 2K injection molded parts are a large part of our business and a core competence at IV Techmould. We run 2K injection molded parts for all 3 of our market segments, automotive, industrial and consumer. "

50hz 1500rpm Yuchai Diesel Generator

We consistently carry out our spirit of ''Innovation bringing development, Highly-quality ensuring subsistence, Management promoting benefit, Credit attracting customers for Gas Generator Unit,Perkins Generator 100kva,Autonatic Generator Start Controller,Air- Cooled Diesel Generator,Rainproof Generator.We sincerely welcome you come to visit us. Hope we have good cooperation in the future. The product will supply to all over the world, such as Europe, America, Australia, Melbourne ,Mumbai ,Saudi Arabia ,Please feel cost-free to send us your specifications and we'll respond to you asap. Get more news about 50hz 1500rpm yuchai diesel generator,you can vist our website!

We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
The acoustic enclosure is made of 1.6/2 mm thick CRCA sheets and structural/ sheet metal base frame painted in Munsel green shade. The walls of the enclosure are insulated with fire retardant foam so as to comply with the 75 dBA at 1mtr sound levels specified by Ministry of Environment & Forest.

Used Plastic Extrusion Machines

Looking for a used plastic extrusion machine for sale or used extruder? Look no further, PlastiWin Capital Equipment has the plastic extrusion machine for you. We offer plastic extruders in brands such as Davis Standard, Nanjing, Milacron, American Kuhne, and many more! Browse our selection of plastic extrusion machines. Get more news about used pvc extruder,you can vist our website!

PlastiWin is pleased to offer plastic extruders, used sheet extrusion lines, film extrusion lines, pelletizing lines, specialty extrusion lines, and pipe and profile extrusion lines for sale. Browse our inventory of used extrusion lines for sale!

Here at PlastiWin, we maintain a diverse inventory of extruders and extrusion line machinery from various reputable manufacturers. With a team of specialists in used extruders, we can help you find the best equipment for your application with competitive pricing to fit your budget. Our goal is to deliver the highest quality products while maintaining complete transparency during every transaction.

Using plastic extrusion, raw plastic is melted and formed into continuous profiles. Items made by extrusion include pipe/tubing, weatherstripping, fencing, deck railings, window frames, plastic films and sheets, and thermoplastic coatings. Using a plastic extruder is a high volume process, where a lot of product is created quickly.

Searching for an extruder machine for a plastic extrusion job? You can get a plastic extrusion machine for PVC, ABS, and many different polymers. PlastiWin has a wide variety of used extrusion machines for sale, to help you deliver high quality parts.

Our most popular brands of used extruders and extrusion lines include: American Leistritz Extruder & Twin-screw Extruder, Entek Extruders, Werner & Pfleiderer Extruder & Twin-screw Extruder, Coperion Extruder, Milacron Extruder, and Berstorff Extruder.

Kura Sushi Offering Tetris Inspired Sushi Boxes

a leading technology-enabled Japanese restaurant concept serving authentic Japanese cuisine through an engaging revolving sushi service model, is thrilled to announce its newest Bikkura Pon collaboration with one of the most popular electronic games of all time, Tetris®. Joining forces once again with the Tetris brand after a highly successful collaboration in late 2021, The Tetris Company and Kura Sushi USA are proud to unveil the reimagined "TetrisTM x Kura Sushi Bikkura Pon Series 2 Collaboration" featuring all new prizes and brightly colored Tetris-inspired sushi boxes.Get more news about sushi tray,you can vist our website!

Available exclusively at Kura Revolving Sushi Bar U.S. restaurants, including at Arsenal Yards in Watertown, through December 31, 2022, the Tetris x Kura Sushi Bikkura Pon prize collection includes a lanyard, temporary tattoos and can badges. The unique collectibles are dispensed from the Bikkura Pon Prize System, an integral part of Kura Sushi USA's interactive and tech-driven dining experience. The system is comprised of a prize machine, touch panel and plate disposal slot located at every table in the restaurant. Connected via sensors, the touch panel registers the number of plates dispensed into the plate disposal slot. For every fifteen plates inserted, a Tetris x Kura Sushi Bikkura Pon prize is automatically dispensed from the prize machine. The prize collection is also available for individual purchase in-store and online at https://order.kurasushi.com, while supplies last.

"Following the success of last year's highly sought after Bikkura Pon collaboration, we are proud to partner again with The TetrisTM Company to celebrate a brand that has created a timeless game beloved by many generations across the globe," said Sally Kurosaki, Promotions & Licensing Manager of Kura Sushi USA, Inc. "We love rewarding guests of all ages with fun prizes from our Bikkura Pon Prize System, and hope they find stacking up sushi plates just as satisfying as stacking up Tetriminos in the TetrisTM game!"

For the first time, Kura Revolving Sushi Bar is inviting guests to enjoy the Bikkura Pon collaboration at-home with the debut of TetrisTM sushi boxes shaped like Tetriminos. Boasting four unique shapes and colors that reflect the brand's iconic game pieces, the Tetrimino sushi boxes are available for purchase at participating Kura Revolving Sushi Bar locations for takeout and delivery, while supplies last.

The conversion of α-pinene to cis-pinane

The concept of a solid catalyst coated with a thin ionic liquid layer (SCILL) was applied to the stereoselective hydrogenation of α-pinene. Nickel, a non-noble metal, was supported on a discarded fluid catalytic cracking catalyst (DF3C) and then modified with different loadings of the ionic liquid 1-ethanol-3-methylimidazolium tetrafluoroborate ([C2OHmim][BF4]). The resulting catalysts showed a range of conversions and selectivities for the hydrogenation of α-pinene. The SCILL catalysts afforded cis-pinane with high selectivity and their activity depended on the ionic liquid loading. For an ionic liquid loading of 10 wt%, although the catalytic activity was suppressed, the selectivity and conversion could reach above 98% and 99%, respectively. In addition, the catalyst remained stable after 13 runs and the activity was almost unchanged with the conversion maintained at approximately 99%. Thus, the ionic liquid layer not only improved the selectivity for cis-pinane but also protected the active site of the catalyst and prolonged the service lifetime of the catalyst. The SCILL catalytic system provides an example of an ionic liquid catalytic system which eliminates organic solvents from the catalytic process.Get more news about cis pinane,you can vist our website!

As a natural, green, and renewable product, α-pinene has drawn great interest for applications in the pharmaceutical, bioenergy, fine chemistry, and flavouring industries.1 There are two kinds of hydrogenation products of α-pinene, namely, cis-pinane and trans-pinane, and among these two products, cis-pinane is more desirable since the content of cis-pinane in raw materials should be greater than 90% to reduce by-products and simplify post-treatments. There is a need to design and identify more effective catalysts for the selective hydrogenation of α-pinene to improve the yield of cis-pinane. To date, various studies have focused on hydrogenation of α-pinene, including a report by Hou et al. on Ru nanoparticles in aqueous micellar microreactors as catalysts with a high selectivity for cis-pinane under mild conditions.2 Milewska et al. studied biphasic hydrogenation of α-pinene over Pd/C under a high pressure of carbon dioxide.3 Deliy et al. reported that hydrogenation and isomerization of pinenes occur simultaneously on Ru/C, Rh/C, Pt/C, and Ir/C catalysts.4 Selka et al. achieved excellent catalytic activity and selectivity based on their studies into hydrogenation of α-pinene over Pd-based catalysts on different supports; however, the reusability of these catalysts was poor.1 Simakova et al. investigated the hydrogenation of α-pinene over 4 wt% palladium on carbon (Pd/C) as a catalyst with n-octane as a solvent.5 Tanielyan et al. used ethanol as solvent in their studies of pinene hydrogenation over anchored Wilkinson catalyst.6 However, noble metal catalysts and organic solvents are expensive, environmentally unfriendly, and the lack of reusability of these catalysts poses major challenges.
Discarded fluid catalytic cracking catalyst (DF3C) is a kind of industrial waste product from petroleum refining processes. DF3C contains heavy metals such as iron, nickel, and vanadium, which were contained in the heavy oil subjected to the reactions. A large amount of DF3C is produced every year, the majority of which is sent to landfill, risking environmental pollution, from heavy metals seeping into groundwater.7 Recently, attention has been paid to recovering DF3C, and it has been applied as a catalyst for cracking of waste plastics,8 a source of heavy metals,7 and rare earth elements.11,12 DF3C is mainly composed of Al2O3, SiO2, and residual nickel, with a rich pore structure and large specific surface area; hence, DF3C might act as an effective active metal carrier.