User blogs
The gold markets have rallied significantly during the course of the
trading session on Thursday to reach towards the 50 day EMA.To get more
news about WikiFX, you can visit wikifx.com official website.
Gold markets have rallied significantly during the course of the trading session on Thursday to break above the 50 day EMA. By breaking above the 50 day EMA, it does suggest that we are going to go higher but there are a lot of reasons to think that it will be somewhat limited. The ultimate indicator that a lot of traders will use for finding the trend is the 200 day EMA, and that currently sits at the $1794 level. If we can break above the 200 day EMA, then obviously it is likely to send this market much higher. At this point time, the market is likely to go looking towards the $1850 level, and then possibly the $1950 level.
All things being equal, the market is likely to see selling pressure somewhere between the 50 day and the 200 day EMA, especially if the interest rate yields in America continue to fall off. However, they turn around and shoot up in the air, then it makes quite a bit of sense that gold would rally due to the fact that it is cheaper to simply clip coupons on a bond then it is to pay for storage. From a pure technical analysis standpoint, we have made a turnaround and it certainly looks as if we are trying to go higher, at least in the short term. The fact that we have shot higher during the trading session to gain over $30 almost immediately does suggest that we probably have further upside. If you are a short-term trader, then the gold market is likely to see more people buying.
Gold markets have rallied significantly during the course of the trading session on Thursday to break above the 50 day EMA. By breaking above the 50 day EMA, it does suggest that we are going to go higher but there are a lot of reasons to think that it will be somewhat limited. The ultimate indicator that a lot of traders will use for finding the trend is the 200 day EMA, and that currently sits at the $1794 level. If we can break above the 200 day EMA, then obviously it is likely to send this market much higher. At this point time, the market is likely to go looking towards the $1850 level, and then possibly the $1950 level.
All things being equal, the market is likely to see selling pressure somewhere between the 50 day and the 200 day EMA, especially if the interest rate yields in America continue to fall off. However, they turn around and shoot up in the air, then it makes quite a bit of sense that gold would rally due to the fact that it is cheaper to simply clip coupons on a bond then it is to pay for storage. From a pure technical analysis standpoint, we have made a turnaround and it certainly looks as if we are trying to go higher, at least in the short term. The fact that we have shot higher during the trading session to gain over $30 almost immediately does suggest that we probably have further upside. If you are a short-term trader, then the gold market is likely to see more people buying.
The dollar extended losses against the Euro on Tuesday, dipping to a
3-week low after the Labor Department reported that inflation rose 0.6%
in March. Lower U.S yields also added to the persistent and renewed
weakness in the dollar.To get more news about WikiFX, you can visit wikifx.com official website.
The current EURUSD trend indicates a bullish momentum after the pair bounced from a low of around 1.17033 reached on the final day of March. Albeit the bearish momentum sustained since the start of the year, the trend seems to have taken a drastic turn to the upside. Prices broke from a falling wedge at around 1.17996, and now, the upturn seems promising.
Where we are and to what to watch
The EURUSD is rising towards the much-awaited target of around 1.2000, a previous resistance level that may prove difficult to break to the upside. Previously, prices broke above multiple Inside+Pin Bar combo patterns at around 1.1900, adding more pressures to the dollar.
Investors should be keen on the 1.1950-1.2000 level as it has proved to be a key resistance area. Any failure to break above this level would open up moves to the downside that could see the dollar strengthen against the Euro, albeit factoring in the fundamental market developments.
Investors should consider selling short on a retracement higher on the approaching resistance level, preferably from a price action sell signal at around 1.2000. Nonetheless, we consider a bullish view in the long term as current technical indicators suggest. If prices breach this level, more upsides are likely, with the 1.2065 as the next target point.
What Investors Are Watching
The 1.1950-1.2000 price resistance level on the EURUSD pair is said to be a psychological level is forex. If prices break above this level, then even further upsize are likely. But how are we likely to judge whether the psychological resistance level is likely to be broken？
ECB and Fed
Investors are keen on ECB Lagarde and Fed Powell‘s speeches today as they are crucial in predicting the next moves in the market. Earlier ECB’S Vice President L. De Guindos warned against the risks of a premature withdrawal of the current monetary stimulus to support the euro economy. It is unlikely that Lagarde will abandon the stance which she has for long advocated.
Well, the U.S may not as well abandon its economic stimulus program, going by previous stances and gestures. Nonetheless, both Lagarde and Powell understand the ills of cheap money in the economies as inflationary pressures continue to rise. Neither are they likely to abandon an accommodative fiscal policy needed to steer economies badly devastated by the coronavirus.Investors will be keen to look at the contrasts in their speeches for possible indicators of the direction of either the euro or the dollar and whether the psychological resistance level of 1.2000 will be broken to allow bulls to jump in.
For now, we will continue to suggest the bullish trend for the upcoming period supported by technical indicators, reminding that it is important to hold above 1.1950-1.2000 to continue the expected rise.
The current EURUSD trend indicates a bullish momentum after the pair bounced from a low of around 1.17033 reached on the final day of March. Albeit the bearish momentum sustained since the start of the year, the trend seems to have taken a drastic turn to the upside. Prices broke from a falling wedge at around 1.17996, and now, the upturn seems promising.
Where we are and to what to watch
The EURUSD is rising towards the much-awaited target of around 1.2000, a previous resistance level that may prove difficult to break to the upside. Previously, prices broke above multiple Inside+Pin Bar combo patterns at around 1.1900, adding more pressures to the dollar.
Investors should be keen on the 1.1950-1.2000 level as it has proved to be a key resistance area. Any failure to break above this level would open up moves to the downside that could see the dollar strengthen against the Euro, albeit factoring in the fundamental market developments.
Investors should consider selling short on a retracement higher on the approaching resistance level, preferably from a price action sell signal at around 1.2000. Nonetheless, we consider a bullish view in the long term as current technical indicators suggest. If prices breach this level, more upsides are likely, with the 1.2065 as the next target point.
What Investors Are Watching
The 1.1950-1.2000 price resistance level on the EURUSD pair is said to be a psychological level is forex. If prices break above this level, then even further upsize are likely. But how are we likely to judge whether the psychological resistance level is likely to be broken？
ECB and Fed
Investors are keen on ECB Lagarde and Fed Powell‘s speeches today as they are crucial in predicting the next moves in the market. Earlier ECB’S Vice President L. De Guindos warned against the risks of a premature withdrawal of the current monetary stimulus to support the euro economy. It is unlikely that Lagarde will abandon the stance which she has for long advocated.
Well, the U.S may not as well abandon its economic stimulus program, going by previous stances and gestures. Nonetheless, both Lagarde and Powell understand the ills of cheap money in the economies as inflationary pressures continue to rise. Neither are they likely to abandon an accommodative fiscal policy needed to steer economies badly devastated by the coronavirus.Investors will be keen to look at the contrasts in their speeches for possible indicators of the direction of either the euro or the dollar and whether the psychological resistance level of 1.2000 will be broken to allow bulls to jump in.
For now, we will continue to suggest the bullish trend for the upcoming period supported by technical indicators, reminding that it is important to hold above 1.1950-1.2000 to continue the expected rise.
Traders are on the lookout for the optimal trading environment and the
best opportunity to make profits while trading Forex.To get more news
about WikiFX, you can visit wikifx.com official website.
Foreign Exchange (Forex), also called currency trading, is an international market with high liquidity and incredible trading volume. It is the worlds largest financial market, with assets worth $6-$7 trillion being traded daily.
Anyone can start trading even without much investment, but you need to be alert to changing market scenarios, given the high volatility. Not to mention, many traders had a terrible experience where they lost their connections while executing their trade operations, resulting in a huge loss of money.
Thankfully, a forex VPS can combat this issue!
What is VPS？
VPS stands for virtual private server, which can host its own copy of an operating system that can be accessed from practically any other computer. This is very similar to web hosting servers that store all the data (text, photos, videos, music, etc.) for a particular website that can be viewed from any desktop or laptop with an internet connection, except that a VPS actually hosts a copy of your machine.
By taking a VPS, you dont have to spend time and money setting up your computer or keeping your PC turned on all the time. A forex VPS hosting service allows you to leverage automated algorithmic methods and strategies to trade seamlessly on their preferred platform along with trading experts to help them in need.
A VPS system lets you automate your trade and execute your processes successfully and at a faster speed, even during your PC power outage. These servers are stable and reliable to run automated trading with round-the-clock availability and continuous server monitoring.
Greater connectivity
With the changing financial market, you need to be always connected with your trading platforms and brokers. Even 1-minute downtime can cost you big bucks. But a good VPS hosting provides greater uptime of over 99% and stable connectivity to maintain 24/7 accessibility.
Security
Cyberattacks happen at any time. A forex VPS hosting ensures your data security with advanced technologies like firewalls, authentications, DDoS protection, and more. Forex VPS hosting services offer multiple data centers to server traders from all parts of the world. You can choose the closest server to you and execute trading without worries or latency issues.
Foreign Exchange (Forex), also called currency trading, is an international market with high liquidity and incredible trading volume. It is the worlds largest financial market, with assets worth $6-$7 trillion being traded daily.
Anyone can start trading even without much investment, but you need to be alert to changing market scenarios, given the high volatility. Not to mention, many traders had a terrible experience where they lost their connections while executing their trade operations, resulting in a huge loss of money.
Thankfully, a forex VPS can combat this issue!
What is VPS？
VPS stands for virtual private server, which can host its own copy of an operating system that can be accessed from practically any other computer. This is very similar to web hosting servers that store all the data (text, photos, videos, music, etc.) for a particular website that can be viewed from any desktop or laptop with an internet connection, except that a VPS actually hosts a copy of your machine.
By taking a VPS, you dont have to spend time and money setting up your computer or keeping your PC turned on all the time. A forex VPS hosting service allows you to leverage automated algorithmic methods and strategies to trade seamlessly on their preferred platform along with trading experts to help them in need.
A VPS system lets you automate your trade and execute your processes successfully and at a faster speed, even during your PC power outage. These servers are stable and reliable to run automated trading with round-the-clock availability and continuous server monitoring.
Greater connectivity
With the changing financial market, you need to be always connected with your trading platforms and brokers. Even 1-minute downtime can cost you big bucks. But a good VPS hosting provides greater uptime of over 99% and stable connectivity to maintain 24/7 accessibility.
Security
Cyberattacks happen at any time. A forex VPS hosting ensures your data security with advanced technologies like firewalls, authentications, DDoS protection, and more. Forex VPS hosting services offer multiple data centers to server traders from all parts of the world. You can choose the closest server to you and execute trading without worries or latency issues.
The dollar has slipped this month as the Federal Reserve stuck to its
message that it wont raise interest rates soon, despite forecasts that
the U.S. economy will recover faster than its peers.To get more news
about WikiFX, you can visit wikifx.com official website.
The greenback is down more than 1% against the currencies of its biggest trading partners so far in April. Before a slight rise Friday morning, the dollar had seen its worst seven-day losing streak since December. The fall in the greenback interrupts a rally so far this year.
The dollar‘s weakness is unlikely to last because the U.S. economy is expected to outpace others. Right now, the U.S. is expected to grow about 2 percentage points more than the eurozone in the year ahead. The gap hasn’t been that large since early 2017, when the dollar was much stronger against the euro: Back then, $1 bought about €0.94, whereas now it buys €0.84.
According to the International Monetary Fund, the U.S. is well placed not only return to, but also to exceed its pre-pandemic growth rate this year.But its a different story in the eurozone, one of the biggest differences between the U.S. and the bloc is that the economic setback last year was much higher in the euro area. Whereas the U.S. economy contracted by 3.5%, the euro zone economy shrunk by almost twice as much.
Given how deep the shock was for them last year, euro nations will naturally struggle more to recover in 2021. Its GDP is seen expanding by 4.4% this year, while U.S. growth is expected to reach 6.4%. The latest vaccination data shows that the total number of doses administered per 100 people in their respective populations is much higher in the U.S. than in the EU. The share of the total U.S. population that has received at least one vaccine dose is just above 30% currently.
There tends to be bad economic surprises in April because of a recent history of winter weakness. But the dollar has fallen this month despite some strong economic data. That might be due to the fact that Covid-19 and the sudden shutdown of the economy last year has made this years economic indicators more difficult to set in context.
A broader economic recovery would extend the long-term trend of a move out of dollars by global asset managers, and particularly central banks that manage large foreign-currency reserves. The share of dollars held by reserve managers has declined steadily over the past two decades and recently fell below 60% of their total assets for the first time since the mid-1990s.
Other foreign investors, led by Japanese banks, have also been selling Treasurys as money managers grapple with the outlook for inflation and interest rates in the U.S. That has led to sharp gains in U.S. yields. Japanese investors mostly hedge their currency exposure when buying U.S. bonds, which should limit the impact on the dollar. However, the rise in Treasury yields ought to attract more funds back to the U.S. markets, according to some investors, hence strengthening the dollar.
The greenback is down more than 1% against the currencies of its biggest trading partners so far in April. Before a slight rise Friday morning, the dollar had seen its worst seven-day losing streak since December. The fall in the greenback interrupts a rally so far this year.
The dollar‘s weakness is unlikely to last because the U.S. economy is expected to outpace others. Right now, the U.S. is expected to grow about 2 percentage points more than the eurozone in the year ahead. The gap hasn’t been that large since early 2017, when the dollar was much stronger against the euro: Back then, $1 bought about €0.94, whereas now it buys €0.84.
According to the International Monetary Fund, the U.S. is well placed not only return to, but also to exceed its pre-pandemic growth rate this year.But its a different story in the eurozone, one of the biggest differences between the U.S. and the bloc is that the economic setback last year was much higher in the euro area. Whereas the U.S. economy contracted by 3.5%, the euro zone economy shrunk by almost twice as much.
Given how deep the shock was for them last year, euro nations will naturally struggle more to recover in 2021. Its GDP is seen expanding by 4.4% this year, while U.S. growth is expected to reach 6.4%. The latest vaccination data shows that the total number of doses administered per 100 people in their respective populations is much higher in the U.S. than in the EU. The share of the total U.S. population that has received at least one vaccine dose is just above 30% currently.
There tends to be bad economic surprises in April because of a recent history of winter weakness. But the dollar has fallen this month despite some strong economic data. That might be due to the fact that Covid-19 and the sudden shutdown of the economy last year has made this years economic indicators more difficult to set in context.
A broader economic recovery would extend the long-term trend of a move out of dollars by global asset managers, and particularly central banks that manage large foreign-currency reserves. The share of dollars held by reserve managers has declined steadily over the past two decades and recently fell below 60% of their total assets for the first time since the mid-1990s.
Other foreign investors, led by Japanese banks, have also been selling Treasurys as money managers grapple with the outlook for inflation and interest rates in the U.S. That has led to sharp gains in U.S. yields. Japanese investors mostly hedge their currency exposure when buying U.S. bonds, which should limit the impact on the dollar. However, the rise in Treasury yields ought to attract more funds back to the U.S. markets, according to some investors, hence strengthening the dollar.
USD/JPY stays depressed for the fifth consecutive day despite the latest
bounce off intraday low of 108.61, also the lowest in three weeks, on
Fridays Tokyo open. While upbeat Tankan survey data could be cited as a
supportive catalyst to the Japanese yen, the recent strength in the US
Treasury yields and headlines suggesting US-Japan talks seems to have
weighed down the yen pair.To get more news about WikiFX, you can visit wikifx.com official website.
As per the latest Reuters Tankan poll, Sentiment among Japanese manufacturers strengthened to a more than two-year high in April. The data also justifies recently upbeat figures from the Asian major that backs Bank of Japans (BOJ) cautious optimism. Even so, the BOJ policymakers stay ready to further ease monetary policy if needed as fears of the coronavirus (COVID-19) resurgence loom over Tokyo.
On the other hand, US President Joe Biden and Japanese Prime Minister Yoshihide Suga as up for a meeting in the White House around 13:30 GMT on Friday. As per the latest update from the US Administration official, conveyed by Reuters, “Biden and Suga to talk in-depth about China.” The official also mentioned that the national leaders will meet one-on-one before their aides join talks. Additionally, chatters surrounding the $2 billion initiative on 5G technology were also loud.
Given the US-China tussle, Washington‘s discussion with Tokyo may push Beijing towards re-conveying his anger on American politics. Also likely challenging the previous risk-on mood could be the US sanctions on Russia and Bloomberg’s piece suggesting a longer ban on the Johnson & Johnson vaccines usage.
Amid these plays, US 10-year Treasury yields gain four basis points (bps) from the one-month low flashed the previous day whereas Japans Nikkei 225 rise 0.21% and S&P 500 Futures struggle for a clear direction near the record top.
Looking forward, the policymakers meeting in the US and American consumer sentiment survey data will be important to watch for fresh impulse. However, the key will be the US bond moves. Although a two-week-old downward sloping trend line near 109.30 guards short-term upside of USD/JPY, the pair sellers need to break an ascending support line from March 10, near 108.55 to take fresh entries.
As per the latest Reuters Tankan poll, Sentiment among Japanese manufacturers strengthened to a more than two-year high in April. The data also justifies recently upbeat figures from the Asian major that backs Bank of Japans (BOJ) cautious optimism. Even so, the BOJ policymakers stay ready to further ease monetary policy if needed as fears of the coronavirus (COVID-19) resurgence loom over Tokyo.
On the other hand, US President Joe Biden and Japanese Prime Minister Yoshihide Suga as up for a meeting in the White House around 13:30 GMT on Friday. As per the latest update from the US Administration official, conveyed by Reuters, “Biden and Suga to talk in-depth about China.” The official also mentioned that the national leaders will meet one-on-one before their aides join talks. Additionally, chatters surrounding the $2 billion initiative on 5G technology were also loud.
Given the US-China tussle, Washington‘s discussion with Tokyo may push Beijing towards re-conveying his anger on American politics. Also likely challenging the previous risk-on mood could be the US sanctions on Russia and Bloomberg’s piece suggesting a longer ban on the Johnson & Johnson vaccines usage.
Amid these plays, US 10-year Treasury yields gain four basis points (bps) from the one-month low flashed the previous day whereas Japans Nikkei 225 rise 0.21% and S&P 500 Futures struggle for a clear direction near the record top.
Looking forward, the policymakers meeting in the US and American consumer sentiment survey data will be important to watch for fresh impulse. However, the key will be the US bond moves. Although a two-week-old downward sloping trend line near 109.30 guards short-term upside of USD/JPY, the pair sellers need to break an ascending support line from March 10, near 108.55 to take fresh entries.
The technical outlook for the haven-associated Japanese Yen remains
overtly bearish, after the funding currency toppled over 5.5% on average
against its major counterparts in the first quarter of 2021. A
continuation of this downside move seems in the cards through the coming
months, as cycle analysis suggests a cyclical downturn is afoot for
JPY.To get more news about WikiFX, you can visit wikifx.com official website.
The chart above highlights the cyclical pattern displayed by the Japanese Yen over the past 37 years, with the currency largely adhering to what appears to be an 8-and-a-half year rotation. JPY set significant bottoms against its major counterparts in late 1998, early 2007 and late 2015.
After bottoming out, the haven-associated currency then seems to outperform early in the cycle, with key highs posted roughly two years after the 1998 and 2007 lows.
Although the Yen soared to its initial cyclical high just 13 months after the start of the period, the development of price over the last five years looks strikingly similar to the previous bullish cycle.
With that in mind, the convincing break below uptrend support extending from the December 2014 low – combined with the RSI snapping its 73-month uptrend and sliding to its lowest levels in six years – may foreshadow extended losses for JPY in the coming months.
Cycle analysis suggests that the currency could fall an additional 25% from current levels before bottoming out in early 2024.The USD/JPY exchange rate appears to be gearing up for an extended move higher, as price surges through the 61.8% Fibonacci retracement of the March 2020 to January 2021 downtrend, and careens towards confluent resistance at the sentiment-defining 200-MA (108.97) and Symmetrical Triangle downtrend.
With the RSI eyeing a push into overbought conditions for the first time since 2017, and the MACD registering its highest degree of positive divergence in four years, the path of least resistance seems skewed to the topside.
A weekly close above psychological resistance at 110.00 is required to validate a bullish break of Symmetrical Triangle consolidation and would probably open the door for the exchange rate to accelerate towards the 2019 high (112.40).
Hurdling that could pave the way for USD/JPY to begin probing the 114.00 handle. However, if triangle resistance remains intact, and prices slide back below the 61.8% Fibonacci (108.23), a pullback towards the trend-defining 55-EMA (106.26) could be on the cards.
The chart above highlights the cyclical pattern displayed by the Japanese Yen over the past 37 years, with the currency largely adhering to what appears to be an 8-and-a-half year rotation. JPY set significant bottoms against its major counterparts in late 1998, early 2007 and late 2015.
After bottoming out, the haven-associated currency then seems to outperform early in the cycle, with key highs posted roughly two years after the 1998 and 2007 lows.
Although the Yen soared to its initial cyclical high just 13 months after the start of the period, the development of price over the last five years looks strikingly similar to the previous bullish cycle.
With that in mind, the convincing break below uptrend support extending from the December 2014 low – combined with the RSI snapping its 73-month uptrend and sliding to its lowest levels in six years – may foreshadow extended losses for JPY in the coming months.
Cycle analysis suggests that the currency could fall an additional 25% from current levels before bottoming out in early 2024.The USD/JPY exchange rate appears to be gearing up for an extended move higher, as price surges through the 61.8% Fibonacci retracement of the March 2020 to January 2021 downtrend, and careens towards confluent resistance at the sentiment-defining 200-MA (108.97) and Symmetrical Triangle downtrend.
With the RSI eyeing a push into overbought conditions for the first time since 2017, and the MACD registering its highest degree of positive divergence in four years, the path of least resistance seems skewed to the topside.
A weekly close above psychological resistance at 110.00 is required to validate a bullish break of Symmetrical Triangle consolidation and would probably open the door for the exchange rate to accelerate towards the 2019 high (112.40).
Hurdling that could pave the way for USD/JPY to begin probing the 114.00 handle. However, if triangle resistance remains intact, and prices slide back below the 61.8% Fibonacci (108.23), a pullback towards the trend-defining 55-EMA (106.26) could be on the cards.
There are numerous companies claiming to make you rich overnight through
trading with them, but once they get your money, chances are you will
probably never hear from them again or lose your entire invested
capital.To get more news about WikiFX, you can visit wikifx.com official website.
“I think I was scammed but I don't know...” Why stay in doubt？ During you hesitation, the forex scammers have already escape away. Allow us to assist you in getting your money back!
Who We Are
As a leading forex broker inquiry platform, WikiFX not only offers more than 26000+ brokers detailed information review, but also support global user self-exposure service.
We are all familiar with the various forex scams that exist out there and our team of professionals is at hand to assist you! Our team of professionals with years of experience is here to provide a free consultation and personalised advice on the particulars of your case.
How to Expose Scam
Expose the scammer on WikiFX app or website. We will contact you to discuss the details of your case and advise accordingly. Read the specific steps to expose a scam broker.
“I think I was scammed but I don't know...” Why stay in doubt？ During you hesitation, the forex scammers have already escape away. Allow us to assist you in getting your money back!
Who We Are
As a leading forex broker inquiry platform, WikiFX not only offers more than 26000+ brokers detailed information review, but also support global user self-exposure service.
We are all familiar with the various forex scams that exist out there and our team of professionals is at hand to assist you! Our team of professionals with years of experience is here to provide a free consultation and personalised advice on the particulars of your case.
How to Expose Scam
Expose the scammer on WikiFX app or website. We will contact you to discuss the details of your case and advise accordingly. Read the specific steps to expose a scam broker.
Currently, surface defect detection of stamping grinding flat parts is
mainly undertaken through observation by the naked eye. In order to
improve the automatic degree of surface defects detection in stamping
grinding flat parts, a real-time detection system based on machine
vision is designed. Under plane illumination mode, the whole region of
the parts is clear and the outline is obvious, but the tiny defects are
difficult to find; Under multi-angle illumination mode, the tiny defects
of the parts can be highlighted. In view of the above situation, a
lighting method combining plane illumination mode with multi-angle
illumination mode is designed, and five kinds of defects are
automatically detected by different detection methods. Firstly, the
parts are located and segmented according to the plane light source
image, and the defects are detected according to the gray anomaly.
Secondly, according to the surface of the parts reflective
characteristics, the influence of the reflection on the image is
minimized by adjusting the exposure time of the camera, and the position
and direction of the edge line of the gray anomaly region of the
multi-angle light source image are used to determine whether the anomaly
region is a defect. The experimental results demonstrate that the
system has a high detection success rate, which can meet the real-time
detection rEquation uirements of a factory.To get more news about lighting hardware, you can visit tenral.com official website.
With the mass production of parts, the inspection of product quality is very important during the process of parts production. The traditional detection methods of surface defects rely on manual detection, and they suffer from an inherently low degree of automation and low detection efficiency, and the entire inspection process is subjective. With the development of automation technology, the detection of surface defects of parts has gradually changed from manual detection to machine detection, in which machine vision is a very popular detection method [1,2,3].
With the mass production of parts, the inspection of product quality is very important during the process of parts production. The traditional detection methods of surface defects rely on manual detection, and they suffer from an inherently low degree of automation and low detection efficiency, and the entire inspection process is subjective. With the development of automation technology, the detection of surface defects of parts has gradually changed from manual detection to machine detection, in which machine vision is a very popular detection method [1,2,3].
The process of stamping parts—from the initial request for quote (RFQ),
through the tooling design/build process, and finally, to the stamping
production—can be a long and winding road with a large gap between what
is designed and what can be manufactured. A part designed with
manufacturability in mind will run the smoothest, with the least amount
of downtime caused by tooling design-to-production disconnects.To get
more news about Lighting stamping parts, you can visit tenral.com official website.
Of course, many parts do not lend themselves to optimal running conditions for a variety of reasons, and a good tooling house knows many methods to overcome such challenges, but those methods typically add cost to the tool and slow the rate at which the tool can run.
That may be fine and well if the costs of the tooling and part production fit the budget of the end user. However, what if the tooling cost pushes that part out of budget or makes the product price noncompetitive? Which features and dimensional criteria that are adding cost to the part may be unnecessarily complex or overdimensioned?Does the customer company have a tooling expert who reviews part designs to ensure that they are designed with tooling feasibility and cost in mind? Does that expert make sure that tolerances are achievable, and that the tool will run efficiently in production? Subtle differences in how a part is dimensioned can make significant differences in tooling and production cost.
The tooling house rarely knows what a part’s function is. Nor does it know the functions of the features within that part. The tooling manufacturer is entirely dependent on the part print to design and build a production tool that will hold required specifications called out on the part print. While that may be how it should be, technically, if a tooling house knows a feature’s function during the tool tryout process—or better yet at the time of RFQ—that can be highly beneficial in wringing out cost and smoothing an operation.For example, let’s say a tooling manufacturer is struggling with getting a hole location to check within tolerance on a part because of the inherent nature of the part, combined with a tight block tolerance. After discussing it with the customer, it’s discovered that the hole’s function is simply for hanging the part on a paint line. Had the part designer treated that feature for what it was—a noncritical feature—the part feature tolerance would have reflected that, and it would not have been a problem. The tooling house probably would have been able to quote the project at a lower cost. The tool was likely quoted to account for the difficulty of holding that feature in print, raising the cost of the tool.
Of course, many parts do not lend themselves to optimal running conditions for a variety of reasons, and a good tooling house knows many methods to overcome such challenges, but those methods typically add cost to the tool and slow the rate at which the tool can run.
That may be fine and well if the costs of the tooling and part production fit the budget of the end user. However, what if the tooling cost pushes that part out of budget or makes the product price noncompetitive? Which features and dimensional criteria that are adding cost to the part may be unnecessarily complex or overdimensioned?Does the customer company have a tooling expert who reviews part designs to ensure that they are designed with tooling feasibility and cost in mind? Does that expert make sure that tolerances are achievable, and that the tool will run efficiently in production? Subtle differences in how a part is dimensioned can make significant differences in tooling and production cost.
The tooling house rarely knows what a part’s function is. Nor does it know the functions of the features within that part. The tooling manufacturer is entirely dependent on the part print to design and build a production tool that will hold required specifications called out on the part print. While that may be how it should be, technically, if a tooling house knows a feature’s function during the tool tryout process—or better yet at the time of RFQ—that can be highly beneficial in wringing out cost and smoothing an operation.For example, let’s say a tooling manufacturer is struggling with getting a hole location to check within tolerance on a part because of the inherent nature of the part, combined with a tight block tolerance. After discussing it with the customer, it’s discovered that the hole’s function is simply for hanging the part on a paint line. Had the part designer treated that feature for what it was—a noncritical feature—the part feature tolerance would have reflected that, and it would not have been a problem. The tooling house probably would have been able to quote the project at a lower cost. The tool was likely quoted to account for the difficulty of holding that feature in print, raising the cost of the tool.
Recently the number of adults who smoke e-cigarette (EC) and/or
heat-not-burn tobacco (HNBT) has been increasing in Japan. It is
important to clarify the awareness of them and actual status of their
use among Japanese students.To get more news about Heat not Burn tobacco products, you can visit hitaste.net official website.
Methods:
In 2018, the author conducted questionnaire surveys in six primary schools and four junior high schools, and asked the students if they knew EC and HNBT (IQOS, PloomTECH, Glo). The degree of recognition was classified into four categories; A: ”never know”, B: ”only know the name”, C: ”have seen the item”, and D: ”my family member(s) smoke(s)”.
Results:
Responses were obtained from 593 schoolchildren (5th and 6th grades) and 584 junior high school students (7th and 8th grades), and the results were as follows. Among schoolchildren about EC, A:47.6%, B:28.7%, C:17.6%, D:6.1%, and about IQOS, A:49.1%, B:14.8%, C:15.1%, D:21.0%. Among students about EC, A:35.3%, B:36.8%, C:22.6%, D:5.3%, and about IQOS, A:53.2%, B:17.8%, C:17.0%, D:12.0%. As for Ploom TECH and Glo, nearly 90% of them answered “A”.
Conclusions:
About half of the schoolchildren and the students knew EC and IQOS. It may reflect the popularity of them in Japanese society. Smoking rate of combustible cigarette in Japanese junior high school students has been dramatically decreasing in these 20 years. The first and nationwide data of their smoking rate of EC and HNBT were reported from the Japanese Youth Tobacco and Alcohol Surveys in 2018. It revealed that the rates of smoking experience of EC were 2.4% in male students and 1.7% in females, and those of HNBT were 1.3% in males and 0.9% in females. As for cigarette, 3.1% in males and 2.1% in females. Since there’s a possibility that more students will start to smoke EC and HNBT, anti-smoking education should include information about the risk of EC and HNBT.
Methods:
In 2018, the author conducted questionnaire surveys in six primary schools and four junior high schools, and asked the students if they knew EC and HNBT (IQOS, PloomTECH, Glo). The degree of recognition was classified into four categories; A: ”never know”, B: ”only know the name”, C: ”have seen the item”, and D: ”my family member(s) smoke(s)”.
Results:
Responses were obtained from 593 schoolchildren (5th and 6th grades) and 584 junior high school students (7th and 8th grades), and the results were as follows. Among schoolchildren about EC, A:47.6%, B:28.7%, C:17.6%, D:6.1%, and about IQOS, A:49.1%, B:14.8%, C:15.1%, D:21.0%. Among students about EC, A:35.3%, B:36.8%, C:22.6%, D:5.3%, and about IQOS, A:53.2%, B:17.8%, C:17.0%, D:12.0%. As for Ploom TECH and Glo, nearly 90% of them answered “A”.
Conclusions:
About half of the schoolchildren and the students knew EC and IQOS. It may reflect the popularity of them in Japanese society. Smoking rate of combustible cigarette in Japanese junior high school students has been dramatically decreasing in these 20 years. The first and nationwide data of their smoking rate of EC and HNBT were reported from the Japanese Youth Tobacco and Alcohol Surveys in 2018. It revealed that the rates of smoking experience of EC were 2.4% in male students and 1.7% in females, and those of HNBT were 1.3% in males and 0.9% in females. As for cigarette, 3.1% in males and 2.1% in females. Since there’s a possibility that more students will start to smoke EC and HNBT, anti-smoking education should include information about the risk of EC and HNBT.